Debian Sid updated make to 4.3. This patch is needed to build gluon on
such recent systems.

Signed-off-by: Chrissi^ <chris@tinyhost.de>

Support Backported from openwrt master

Signed-off-by: Chrissi^ <chris@tinyhost.de>

Dark4MD authored 5 years ago and chrissi^ committed 5 years ago

Edit by Chrissi^:
Patch taken from:
https://github.com/freifunkh/site/blob/master/patches/0003-added-TP-Link-TL-WR841ND-N-Devices-for-8M-and-16M-Va.patch
This Patch adds support for 8M and 16M Flash variants of TP-Link
TL-WR841 with hand-made modifications.

While bumping OpenWrt, I've forgot to refresh the patches.

Fixes 61d460ec ("modules: bump OpenWrt")

This seems to unbreak bootloader image generation with certain shells /
build setups.

Fixes #1766

Instead of unconditionally loading this module on boot the gluon_bat0
netifd protocol script will later take care of loading either the
batman-adv or batman-adv-legacy module, depending on the configured routing
algorithm in UCI.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

This reverts commit 8dd13cbb.

Fixes #1756

This reverts commit 3d3617ed.

This updates the batman-adv OpenWrt package to the current version
provided in the master branch of the openwrt-routing packages
repository:

* e26096a batman-adv: Fix duplicated OGMs on NETDEV_UP
* 1ff00ee batman-adv: upgrade package to latest release 2019.2

Small difference to the original:

* Compat code for batadv_genl_dump_check_consistent()
* Compat code for cfg80211_sinfo_release_content()
* 0001-batman-adv-add-compat-hacks.patch kept
* batctl dependency kept removed
* config related files unchanged

The new config format was not backported yet to keep this patch small
and less invasive.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>

The factory firmware omits the JFFS2 end-marker while flashing via
web-interface. Add a 64k padding after the marker fixes this problem.

When the end-marker is not present, OpenWRT won't save the overlayfs
after initial flash.

This always pulls in the batman-adv compat 15 kernel module. However,
batctl works just as well with batman-adv-legacy (compat 14).

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>

patches/openwrt: refresh 0006-generic-vxlan-backport-support-for-VXLAN-over-link-local-IPv6-to-4.9.patch (#1663)

If no mcast_rate is set for the wifi-iface then there is no rate_idx (0)
set for the bss. This breaks for example 5GHz meshpoint interfaces because
0 maps to a CCK rate (11Mbit/s).

It must also be avoided that the ath10k-ct internal state for the rates is
not synced with the mac80211 rates state. Otherwise, the user specified
rate (e.g. a wifi-iface mcast_rate for a meshpoint interface) will only be
set on startup. And a short while after that, ath10k-ct specific code in
ath10k_check_apply_special_rates is missing a valid rate in its own
structures and is then recalculating a new default rate. This default rate
is in most situations not the requested rate.

Fixes: a399b607 ("ath10k/ath10k-ct: support multicast and management rate control")

Drivers with software rate control can directly use the selected multicast
rate for multicast/broadcast frames and the minimal basic rate for
management frames. But drivers with offloaded rate control algorithms must
be informed about such upper layer decisions to configure the
hardware/firmware.

A new BSS_CHANGED_MCAST_RATE is introduced in mac80211 to automatically
inform all drivers. ath10k can detect this event and forward it via WMI to
the driver. The already existing BSS_CHANGED_BASIC_RATES can be used to
select the management rate.

Without the WMI commands, a low rate (not necessarily one from the basic
rates) is used for bcast/mcast/management frames. This means that the
/etc/config/wireless settings basic_rate and mcast_rate would have no
effect on the rates selected by this driver for the mentioned frames.

This backports the TP-Link Archer C50 v4.

We are dropping the following upstream commits. They add support for the
TP-Link recovery-flag which enabled the web-recovery. As they are not
needed for the router to work, we drop them for now.

28cd2ca base-files: sysupgrade: support additional mtd options
1e06482 mtd: add logic for TP-Link ramips recovery magic

6e16dd1234 mt76: update to the latest version
76037756d0 kernel: bump 4.14 to 4.14.94
455bfd1065 kernel: bump 4.9 to 4.9.151
fafd7691e6 opkg: update to latest Git head
e789bd2243 opkg: drop argument from check_signature in opkg.conf
3603c2321d ramips: mt7621: fix 5GHz WiFi LED on ZBT WG3526
7f98cd8d50 odhcpd: fix onlink IA check (FS#2060)
abd0f7995e kmod-sched-cake: bump to latest cake

Compile-tested: ar71xx-{tiny,generic}, ramips-mt7621, x86-64

50789acf4e ar71xx: add support for UniFi-AC-Mesh-Pro
40e1450f59 kernel: bump 4.14 to 4.14.88
85f42a74d3 kernel: bump 4.9 to 4.9.145

Compile-tested: ar71xx-generic, ramips-mt7620, ipq40xx

6f74e269c8 kernel: bump 4.14 to 4.14.87
b2f243394e kernel: bump 4.9 to 4.9.144
2213b20aee kernel: bump 4.14 to 4.14.86
bcd7644007 kernel: bump 4.9 to 4.9.143
d5afaa4114 openvpn: re-add option comp_lzo
629073e86d rpcd: update to latest Git head
1cd945ea22 ramips: fix leds on GL.iNet GL-MT300N-V2
fbadfecbb5 ipq40xx: fix openmesh sysupgrade with tar content out of order
06a20afb34 rules.mk: fix syntax error
d40e90986c rules.mk: add INSTALL_SUID macro
d40de11d1b base-files: fix prerm return value, align with postinst code
cc8e875039 sdk: find kernel modules when KDIR is a symlink
a8b292afe6 uhttpd: update to latest Git head
7a8b75375c uhttpd: support multiple Lua prefixes
fede6df09e uhttpd: update to latest Git head
9671a2d2c8 apm821xx: MBL: load kernel/dtb from SATA 0:1 first
26ebcc88e3 apm821xx: wndr4700: restore sd-card media detection
5337319bdf uclient: update to latest Git head

Compile-tested: ar71xx, ipq40xx, x86-64
Runtime-tested: ar71xx

Signed-off-by: Christoph Krapp <achterin@googlemail.com>

ath10k-ct uses a rather high number of buffers to communicate with the
QCA/Candelatech firmware. Especially the HTC (host-target-communication)
and HTT (host-target-transport) can take up a lot of memory when data is
transferred over a ath10k wifi link.

Even a 256MB device with three radios can go OOM (while sending to three
devices using UDP unicast/multicast packets) with the default buffer
limits. Unfortunately, this also reduced the maximum 5GHz throughput on an
IPQ40xx device from 494/432 Mbit/s for TCP transfers (download/upload) to
438/343 Mbit/s. These throughput values should still be good enough for a
Freifunk installation. And these changes are already used by ath10k in
OpenWrt 18.06.

0d549271d397 ar71xx: fix TP-Link Archer C7 v5 switch LEDs
dd6d554b2c1e kernel: fix ubifs loosing O_TMPFILE data after power cut
4db74fbd6908 kernel: bump 4.14 to 4.14.81
6f388adef820 kernel: bump 4.9 to 4.9.137
b0d08ec3aef3 sunxi: remove kernel 4.9 support

Signed-off-by: Martin Weinelt <martin@darmstadt.freifunk.net>

bc7abe8729f3 include/kernel-build.mk: fix kernel rebuild on backport patch changes
c99c70e05303 kernel: backport page fragment API changes from 4.10+ to 4.9

Do not break the build on kernel 4.9 (ar71xx).

514a4b3e1b4e include/feeds.mk: rework generation of opkg distfeeds.conf
3e89f58a5ead base-files: fix feed list in PKG_CONFIG_DEPENDS
7fa7c854fe33 include/feeds.mk: always add available feeds to PACKAGE_SUBDIRS
a5b9553cf592 scripts/feeds: add src-dummy method
2f306873efbe ramips: TP-Link TL-WR902AC v3: add missing wps button
36a4681b2bef ramips: TP-Link TL-WR902AC v3: don't build factory image
ca903c73c705 kernel: bump 4.14 to 4.14.54 for 18.06
3a5498c5e55d kernel: bump 4.9 to 4.9.111 for 18.06
27014da237f1 mac80211: Expose support for ath9k Dynack
5a40fad22a39 kernel: bcm47xxpart: fix getting user-space data partition name

This commit makes use of the Power-LED as Diag-LED, allowing the LED to
work as a status indicator for config-mode.

Signed-off-by: David Bauer <mail@david-bauer.net>

b6a1f43075f9 base-files: fix UCI config parsing and callback handling
6734f32d91cd mtd: add build hack to reintroduce shared mtd for older releases
aaac9e82aa60 mtd: mark as nonshared to fix FS#484
0fee4906d5c0 ustream-ssl: update to latest git HEAD
f34a0756fd94 ustream-ssl: update to latest git HEAD
98b9d8a3d3fd mbedtls: Activate the session cache
88ba88e5adc4 mbedtls: update mbedtls to version 2.7.3