Signed-off-by: David Bauer <mail@david-bauer.net>

Signed-off-by: David Bauer <mail@david-bauer.net>

Implement a flexible system for handling site-defined features as well
as packages.

This system is inspired by the existing feature-system and allows for a
more flexible approach for selecting specific packages for devices.

Features are now defined in a `features` file in the site-root. The same
goes for packages.

These files are sequentially evaluated and the device-package list is
evaluated for each device independently.

Signed-off-by: David Bauer <mail@david-bauer.net>

CI: update filters

Update the filters to make the CI happy again.

This was not caught by the CI actions of #3027, as the PR had been open
for too long.

new target: armsr

gluon-core: use delete_all instead of iterated delete

Use a delete_call with a boolean parameter function instead of manually
iterating over all devices.

Link: https://github.com/freifunk-gluon/gluon/pull/3102



Signed-off-by: David Bauer <mail@david-bauer.net>

Signed-off-by: David Bauer <mail@david-bauer.net>

This preserves configuration of MAC-addresses for each interface in case
OpenWrt sets them using netifd.

This is done by preserving all device-configuration which does not
define a bridge or the MAC-address of a bridge.

Closes #3100

Signed-off-by: David Bauer <mail@david-bauer.net>

In case a community does not use Git for versioning it's site or using a
different versioning scheme that do not have annotated tags on the
master branch.

Signed-off-by: David Bauer <mail@david-bauer.net>

BROKEN TARGETS were built when BROKEN was set as a variable regardless of
it's value. Even an empty BROKEN variable caused BROKEN TARGETS to be
built. For DEVICES the number was evaluated and compared to true by Lua.

Make behavior consistent for relevant values UNSET/EMPTY/0 and 1:
UNSET/EMPTY/0: Don't build BROKEN TARGETS and DEVICES
1: Build BROKEN TARGETS and DEVICES

The behavior remains inconsistent for all positive numbers except 1.
(even floating point)

x86: add MediaTek drivers

modules: update to latest HEAD

Add MediaTek driver packages for MT7915 as well as MT7921 WiFi 6 cards.
In addition, fix the mt7615 package name, as the driver was seperated
into kernel and firmware packages.

Signed-off-by: David Bauer <mail@david-bauer.net>

81cdbd3 opennds: update to version 10.2.0

3cc9f0f75 upmpdcli: Update to 1.8.6
7697be576 libupnpp: Update to 0.24.1
c95ff2e26 libnpupnp: Update to 5.1.2
6d5cd9ad1 upmpdcli: update to 1.8.4
24eb6278d libupnpp: update to 0.24.0
10b5d353a libnpupnp: update to 5.1.1
8b1531158 irqbalance: Fix log spam and correct meson version
ac9f4c118 dnsproxy: Update to 0.60.0
c4e2a6919 yq: Update to 4.40.4
711511144 rclone: Update to 1.65.0
7d768e321 v2raya: update to 2.2.4.3
4fa89ac51 python-cryptography: Update to 41.0.7
672a20936 python-cryptography: Update to 41.0.5
af57f8dbf adblock-fast: bugfixes: getsize/resolver
f93e3ce71 iperf3-mt: remove package
48f35252c iperf3: update to 3.16
b6b105abe fail2ban: Fix compatibility with Python 3.11
c1a8eb098 dhtd: udpate to 0.2.6
473b173ff adblock-fast: add smartdns ipset/nftset support
d83ed18f8 uspot: add package
d3ee25861 AriaNg: bump 1.3.2 to 1.3.6
ec8fdad70 netbird: update to version 0.24.3
b4a70180b aardvark-dns: update to version 1.9.0
d5f206830 netavark: update to version 1.9.0
d88bf3d53 podman: update to version 4.8.0
21a5a426a crun: update to version 1.12
ee6796371 CI: Fix CI_HELPER
fc4a85721 node: bump to v18.19.0
78d47e2a5 postfix: Fix enabling PCRE support
2fd96090a dhtd: update to 0.2.5
78305d7bc xray-core: Update to 1.8.6
eee27741d netifyd: Updated to v4.4.7
03d07dc77 external-protocol: rename and update cni-protocol
dba4aa8e0 v2ray-geodata: Update to latest version
133b0774d v2ray-geodata: Update to latest version
5645e1880 v2ray-core: Update to 5.12.1
a53702959 yq: Update to 4.40.3
c2ba6ea6f dnsproxy: Update to 0.59.1
8dffb5132 ngtcp2: update to 1.1.0
dc358fb4e nghttp3: update to 1.1.0

efdafcc974 mediatek: filogic: Fix GPIOs for Zbtlink ZBT-Z8102AX
81b7da1052 lua5.3: fix typo calling lua53 instead of lua5.3 for Package Default
d9246902b0 mediatek: add support for Zbtlink ZBT-Z8102AX
6df6f03396 mediatek: filogic: add JCG Q30 PRO support
4f9c4113c4 uboot-mediatek: add JCG Q30 PRO support
557a32aba0 filogic: add support for ASUS TUF AX6000
982bfd98cb ucode: adjust module dependencies
f8c149dcbd mediatek: fix eeprom loading (Mercusys MR90X v1)
5a0bdab24c mt76: drop default eeprom file for mt7986-firmware
cc285dc2b6 generic: net: phy: realtek: add interrupt support for RTL8221B
6143b730fc uboot-mediatek: fix typo in bootmenu for GL-MT6000
f3a8820959 mediatek: filogic: remove kmod-usb2 for GL-MT6000
b530d492a9 filogic: add support for GL.iNet GL-MT6000
28d15e2040 mediatek: filogic: add support for Ubiquiti UniFi 6 Plus (U6+)
e1d1c26c0f mediatek: add support for Cetron CT3003
3846b6eb49 filogic: support Telenor branded ZyXEL EX5700
7606dac661 base-files: support parse DT LED color and function
6261ae12e1 mpc85xx: allow mapping of cpu1 spin-table page
de37b56cdb mpc85xx: increase available RAM on Extreme Networks WS-AP3825i

Build and release a docker container for the next branch.

Signed-off-by: David Bauer <mail@david-bauer.net>

treewide: replace luabitops with lua-bit32

workflows: build-container: build images for amd64 and arm64

mac80211: avoid crashing on invalid band info

Frequent crashes have been observed on MT7916 based platforms. While the
root of these crashes are currently unknown, they happen when decoding
rate information of connected STAs in AP mode. The rate-information is
associated with a band which is not available on the PHY.

Check for this condition in order to avoid crashing the whole system.
This patch should be removed once the roout cause has been found and
fixed.

Closes: #2980
Link: https://github.com/freifunk-gluon/gluon/issues/2980



Signed-off-by: David Bauer <mail@david-bauer.net>

docs: pin sphinx version

ci: pin runner version to Ubuntu 22.04

ci: build Gluon in own Docker image

gluon-mesh-vpn-fastd: use CAKE as bandwidth-shaper

Pin the docs python dependencies to specific versions in order to
establish a consistent build-result.

Signed-off-by: David Bauer <mail@david-bauer.net>

Bumps [docker/metadata-action](https://github.com/docker/metadata-action) from 62339db73c56dd749060f65a6ebb93a6e056b755 to e6428a5c4e294a61438ed7f43155db912025b6b3.
- [Release notes](https://github.com/docker/metadata-action/releases)
- [Commits](https://github.com/docker/metadata-action/compare/62339db73c56dd749060f65a6ebb93a6e056b755...e6428a5c4e294a61438ed7f43155db912025b6b3

)

---
updated-dependencies:
- dependency-name: docker/metadata-action
  dependency-type: direct:production
...

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Bumps [docker/build-push-action](https://github.com/docker/build-push-action) from fdf7f43ecf7c1a5c7afe936410233728a8c2d9c2 to 4a13e500e55cf31b7a5d59a38ab2040ab0f42f56.
- [Release notes](https://github.com/docker/build-push-action/releases)
- [Commits](https://github.com/docker/build-push-action/compare/fdf7f43ecf7c1a5c7afe936410233728a8c2d9c2...4a13e500e55cf31b7a5d59a38ab2040ab0f42f56

)

---
updated-dependencies:
- dependency-name: docker/build-push-action
  dependency-type: direct:production
...

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Bumps [docker/login-action](https://github.com/docker/login-action) from 1f401f745bf57e30b3a2800ad308a87d2ebdf14b to 3d58c274f17dffee475a5520cbe67f0a882c4dbb.
- [Release notes](https://github.com/docker/login-action/releases)
- [Commits](https://github.com/docker/login-action/compare/1f401f745bf57e30b3a2800ad308a87d2ebdf14b...3d58c274f17dffee475a5520cbe67f0a882c4dbb

)

---
updated-dependencies:
- dependency-name: docker/login-action
  dependency-type: direct:production
...

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Bumps [korthout/backport-action](https://github.com/korthout/backport-action) from 2.0.0 to 2.1.1.
- [Release notes](https://github.com/korthout/backport-action/releases)
- [Commits](https://github.com/korthout/backport-action/compare/v2.0.0...v2.1.1

)

---
updated-dependencies:
- dependency-name: korthout/backport-action
  dependency-type: direct:production
  update-type: version-update:semver-minor
...

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Bumps [sphinx-rtd-theme](https://github.com/readthedocs/sphinx_rtd_theme) from 1.3.0 to 2.0.0.
- [Changelog](https://github.com/readthedocs/sphinx_rtd_theme/blob/master/docs/changelog.rst)
- [Commits](https://github.com/readthedocs/sphinx_rtd_theme/compare/1.3.0...2.0.0

)

---
updated-dependencies:
- dependency-name: sphinx-rtd-theme
  dependency-type: direct:production
  update-type: version-update:semver-major
...

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>