cdc8470aec mac80211: fix MT7620 Wi-Fi channel scanning function
9df9126320 ramips: pinctrl: support requesting different functions for same group
4f1a7e8897 mac80211: rework MT7620 PA/LNA RF calibration
b2d264dc68 mediatek: mt7622: set DEVICE_DTC_ADDR for BPi-R64
a2ffbc8d16 arm-trusted-firmware-mediatek: enable built-in 2.5G PHY on MT7988
d052d409a0 uboot-mediatek: fix dependency on TF-A for MT7988 RFB (sdmmc)
3967c26974 mediatek: filogic: remove stray quote
625d19c1e2 generic: sync MediaTek Ethernet driver with upstream
230c09d203 mediatek: add support for Ubiquiti UniFi 6 LR v3
c8c1805100 uboot-mediatek: add builds for UniFi 6 LR v2 and v3
ed370ec424 mediatek: generate bootloader artifacts for mt7988_rfb
35d123adfe uboot-mediatek: build fully-featured U-Boot for MT7988 RFB
87ef305984 mediatek: improve mt7981.dtsi
ffede121f8 mediatek: filogic: improve pinctrl drivers
5a9720945f mediatek: i2c: mt65xx: allow optional pmic clock
88c12d6632 mediatek: re-add dropped properties on BPi-R3
cf08db988b generic: backport initial LEDs hw control support
e685162a78 kernel: bump 5.15 to 5.15.130
8bf25dba77 kernel: bump 5.15 to 5.15.129
3c1721ae03 kernel: bump 5.15 to 5.15.128
56827dac01 kernel: allow adding devices without hw offload to a hw flowtable
736e3b81aa urngd: update to the latest master
f493987d13 nettle: update to 3.9.1
b9c94686f7 Revert "ath11k-firmware: update to stable WLAN.HK.2.9.0.1-01837"
104178a990 mt76: update to the latest version

docs: GH use `requirements.txt`

Bumps [sphinx-rtd-theme](https://github.com/readthedocs/sphinx_rtd_theme) from 1.2.2 to 1.3.0.
- [Changelog](https://github.com/readthedocs/sphinx_rtd_theme/blob/master/docs/changelog.rst)
- [Commits](https://github.com/readthedocs/sphinx_rtd_theme/compare/1.2.2...1.3.0

)

---
updated-dependencies:
- dependency-name: sphinx-rtd-theme
  dependency-type: direct:production
  update-type: version-update:semver-minor
...

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Bumps [korthout/backport-action](https://github.com/korthout/backport-action) from 1.3.1 to 1.4.0.
- [Release notes](https://github.com/korthout/backport-action/releases)
- [Commits](https://github.com/korthout/backport-action/compare/v1.3.1...v1.4.0

)

---
updated-dependencies:
- dependency-name: korthout/backport-action
  dependency-type: direct:production
  update-type: version-update:semver-minor
...

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Better known as ZyXEL Multy M1

Replaces hard coded dependency.

Signed-off-by: David Bauer <mail@david-bauer.net>

modules: update to latest HEAD

Fix the example config for the dns upstreams.

Since the device isn't marked as broken it should be mentioned in the docs as a supported device.

mediatek-filogic: add support for ZyXEL NWA50AX Pro

78ac6ee batman-adv: Fix lock assert after fragmentation change

dfbf87aa1 net/mosquitto: bump to 2.0.17
fe5ab80fb tunneldigger-broker: update to v0.4.0
411e11393 tunneldigger-broker: add rate-limit hook
00fc9da4e tunneldigger-broker: add option to isolate bridge ports
e597c3e55 tunneldigger-broker: update lib functions
b4f0ce3d1 tunneldigger-broker: update config file and init for v0.4.0
e77a20e5b Revert "tailscale: Update to 1.48.0"
4cce597a2 natmap: update to 20230820
0047d0507 tailscale: Update to 1.48.0
3da7903ab yq: Update to 4.35.1
37412eec4 sqm-scripts: Bump to v1.6.0

e74a4b509f mediatek: enable NMBM remapping for NWA50AX Pro UBI
d792d20832 ath79: fix first reboot issue on Netgear WNDR4300 v2 and WNDR4500 v3
7eda621404 ath79: rework Netgear nand devices image recipe
f445c38263 mediatek: filogic: wax220: cleanup device tree
16aecc12c2 mediatek: filogic: wax220: support factory image
99d9519bac mediatek: enable NWA50AX Pro eth LEDs
9ed01992f3 mediatek: add missing packages for Acer Predator W6
e658eee813 ipq4019: add support for ZTE MF287 Pro aka DreiNeo Pro

modules: switch to openwrt-23.05

Currently the build fails for the D-Link DIR-825 B1. THis is due to the
factory image being size-constrained. The sysupgrade image is not
affected, as OpenWrt now uses a concatenated firmware partition.

To newly install such a device, please use the latest OpenWrt 22.03
factory image and install a Gluon sysupgrade.

Signed-off-by: David Bauer <mail@david-bauer.net>

OpenWrt dropped the nand string from filenames in the ipq40xx target [1].

Therefore it's no longer neccesary to work arround it in Gluon.

[1] https://github.com/openwrt/openwrt/commit/d9f7c751c9772772473d226b1088e8dec31f3090

These boards do not support DSA in OpenWrt and thus lack working
ethernet. Disable them for now.

Co-authored-by: Tom Herbers <mail@tomherbers.de>

device fails to build

Signed-off-by: David Bauer <mail@david-bauer.net>

The build process fails without that.

Co-authored-by: Tom Herbers <mail@tomherbers.de>

Co-authored-by: David Bauer <mail@david-bauer.net>
Co-authored-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Tom Herbers <mail@tomherbers.de>

docs: add v2023.1 release notes

Signed-off-by: David Bauer <mail@david-bauer.net>

Signed-off-by: David Bauer <mail@david-bauer.net>

Dockerfile: update base to debian:bookworm-slim

Merge pull request #2923 from freifunk-gluon/dependabot/github_actions/korthout/backport-action-1.3.1

build(deps): bump korthout/backport-action from 1.2.0 to 1.3.1

Bumps [korthout/backport-action](https://github.com/korthout/backport-action) from 1.2.0 to 1.3.1.
- [Release notes](https://github.com/korthout/backport-action/releases)
- [Commits](https://github.com/korthout/backport-action/compare/v1.2.0...v1.3.1

)

---
updated-dependencies:
- dependency-name: korthout/backport-action
  dependency-type: direct:production
  update-type: version-update:semver-minor
...

Signed-off-by: dependabot[bot] <support@github.com>