Drivers with software rate control can directly use the selected multicast
rate for multicast/broadcast frames and the minimal basic rate for
management frames. But drivers with offloaded rate control algorithms must
be informed about such upper layer decisions to configure the
hardware/firmware.

A new BSS_CHANGED_MCAST_RATE is introduced in mac80211 to automatically
inform all drivers. ath10k can detect this event and forward it via WMI to
the driver. The already existing BSS_CHANGED_BASIC_RATES can be used to
select the management rate.

Without the WMI commands, a low rate (not necessarily one from the basic
rates) is used for bcast/mcast/management frames. This means that the
/etc/config/wireless settings basic_rate and mcast_rate would have no
effect on the rates selected by this driver for the mentioned frames.

This backports the TP-Link Archer C50 v4.

We are dropping the following upstream commits. They add support for the
TP-Link recovery-flag which enabled the web-recovery. As they are not
needed for the router to work, we drop them for now.

28cd2ca base-files: sysupgrade: support additional mtd options
1e06482 mtd: add logic for TP-Link ramips recovery magic

also added manifest aliases for gl-ar150, gl-ar300m, gl-ar750

This allows for smaller firmware images and makes it possible to reset a
device via firstboot command.

Signed-off-by: Matthias Fritzsche <matthias@chemnitz.freifunk.net>

It makes sense to render using the same theme locally that is used on RTD.
The theme can be installed using:

    pip install sphinx_rtd_theme

9b14c7d3d1 netifd: handle hotplug event socket errors
e33612484a brcm63xx: HG655b: fix the imagetag at dts
ef17edae3d kernel: bump 4.14 to 4.14.97
21762fe9d6 kernel: bump 4.9 to 4.9.154
ab41836321 mt76: update to the latest version
026f08a610 kernel: bump 4.14 to 4.14.96
1f1f421af6 kernel: bump 4.9 to 4.9.153

Compile-tested: ar71xx-generic, ramips-mt7621, x86-64

13eeee7b2b mt76: update to the latest version
ac1ce25671 OpenWrt v18.06.2: revert to branch defaults
a02809f61b OpenWrt v18.06.2: adjust config defaults
cddd7b4c77 base-files: config_get: prevent filename globbing
e6162b2127 dnsmasq: backport missing braces fix
d4178c8f47 build: fix umask detection bashism
b98b55a64f build: fix STAGING_DIR cleaning for packages
e6c2f3feb1 ar71xx: use correct wan mac address for the TP-Link Archer C7 v4
2c7a1ccaea ar71xx: Add usb drivers in Archer C7 v4/v5 images
39c3b5139f openssl: bump to 1.0.2q
80ed6ebc56 dnsmasq: backport upstream static lease fix
4f2199f528 wireguard: bump to 0.0.20190123
8c105c62e4 wireguard: Update to snapshot 0.0.20181218
1447924c95 mbedtls: update to 2.14.1 for 18.06
e5a0b6cde0 uhttpd: disable concurrent requests by default
11bfb39e39 kernel: bump 4.14 to 4.14.95
dd5fa217dc kernel: bump 4.9 to 4.9.152
91d3b87353 uboot-fritz4040: fix crash caused by interaction with gcc 7.1+

Compile-tested: ar71xx-generic, mpc85xx-generic, ramips-mt7621
Runtime-tested: ramips-mt7621 (D-Link DIR860L)

ath5k supports only IEEE 802.11 a/b/g

Signed-off-by: Matthias Fritzsche <matthias@chemnitz.freifunk.net>

Signed-off-by: Matthias Fritzsche <matthias@chemnitz.freifunk.net>

ea345d1 Merge pull request #442 from ecsv/batadv-18.06
0231308 batman-adv: Merge bugfixes from 2019.0

Compile-tested: ar71xx-{tiny,generic}, ramips-mt7621, x86-64
Runtime-tested: ar71xx-generic (TP-Link TL-WR1043NDv2)

6e16dd1234 mt76: update to the latest version
76037756d0 kernel: bump 4.14 to 4.14.94
455bfd1065 kernel: bump 4.9 to 4.9.151
fafd7691e6 opkg: update to latest Git head
e789bd2243 opkg: drop argument from check_signature in opkg.conf
3603c2321d ramips: mt7621: fix 5GHz WiFi LED on ZBT WG3526
7f98cd8d50 odhcpd: fix onlink IA check (FS#2060)
abd0f7995e kmod-sched-cake: bump to latest cake

Compile-tested: ar71xx-{tiny,generic}, ramips-mt7621, x86-64

fixes #1629

this matches the output of
lua -e 'print(require(platform_info).get_image_name())'

This way the manifest file is accepted by the autoupdater

The original commit only applied its changes to the source file and did
not rebuild the minified file, therefore the change never went live.

939fa07b04 kernel: bump 4.14 to 4.14.93
cae263227f kernel: bump 4.9 to 4.9.150
f34ad1a8f0 mt76: update to the latest version
d58c6aedb6 tools/firmware-utils: fix sysupgrade typo in mkdapimg2
0cef35f096 tools/firmware-utils: fix sysupgrade typo in mkdapimg
0d6eaa0ba5 octeon: fix typo in platform.sh
069fda746e fstools: update to the latest master branch
3b4e779e93 fstools: update to git HEAD
d7275c0312 fstools: filter unknown action in mount.hotplug script
e0daa62af6 fstools: Install mount.hotplug and 10-fstab.defaults as 600
4c0e15fc16 base-files: install missing /etc/iproute2/ematch_map
c3fef269d6 cns3xxx: use actual size reads for PCIe
367ccf7a2d kernel: bump 4.14 to 4.14.91
b9dcf2de5f kernel: bump 4.9 to 4.9.148
a8cc06c537 mac80211: brcmfmac: backport firmware loading changes & fix memory bugs
c5c20f510a odhcpd: noop to fix PKG_SOURCE_DATE
62ddfaff32 odhcpd: filter routes based on prefix_filter
8a9b0b95df apm821xx: switch MX60(W)'s recovery images to multi-image method
afcdf099b7 kernel: fix f2fs on big endian machines
016a71a18a odhcpd: backport prefix filter/NETEV_ADDR6LIST_CHANGE event fixes
806b570a35 ath10k: update QCA4019 firmware
baa00b2182 brcm2708-gpu-fw: update to git HEAD
5af6b7976f bcm53xx: backport DTS changes queued for the 4.21
dbbba84ed4 bcm53xx: rename dts backport patches changing their prefixes

Compile-tested: ar71xx, ramips-{mt7621,mt76x8}, x86-64
Runtime-tested: ramips-mt7621 (D-Link DIR860L)

The text was changed in the i18n files, but the corresponding change in the
Lua sources seemingly got lost during a rebase.

Closes #1611

This commit removes the broken flag from all devices in the mt76x8
subtarget.

The stability of the mt76 driver for the mt7628 and mt7612 has greatly
improved in the last half-year. It might be still behind ath9k and
ath10k but it is suitable for daily use.

This affects the following devices:

 - GL.iNet MT300N v2
 - TP-Link Archer C50 v3
 - TP-Link TL-WR841 v13

Signed-off-by: Martin Weinelt <martin@darmstadt.freifunk.net>

This commit distributes dualband radios evenly on 2.4 GHz and 5GHz with
2.4 GHz being prioritised higher than 5 GHz. This means in case a device
has only a single radio and this radio supports operation in both bands,
it will be set to 2.4 GHz.

Tested-by: Martin Weinelt <martin@darmstadt.freifunk.net>
Signed-off-by: David Bauer <mail@david-bauer.net>

Adds a footnote with a link to an instruction on how to flash Gluon onto
AVM routers.

Signed-off-by: David Bauer <mail@david-bauer.net>

The driver has stablized enough to officially support ramips-mt76x8 devices
again. At least remove BROKEN for VoCore 2 (as it was supported before).

eef6bd3393f4 bcm53xx: update pinctrl driver & use its new DT binding
61323d22c073 dropbear: fix dropbear startup issue