docs: update Makefile and config to Sphinx 1.8.4 defaults

docs/Makefile

-# Makefile for Sphinx documentation
+# Minimal makefile for Sphinx documentation
 #
 
 # You can set these variables from the command line.
 SPHINXOPTS    =
 SPHINXBUILD   = sphinx-build
-PAPER         =
+SOURCEDIR     = .
 BUILDDIR      = _build
 
-# Internal variables.
-PAPEROPT_a4     = -D latex_paper_size=a4
-PAPEROPT_letter = -D latex_paper_size=letter
-ALLSPHINXOPTS   = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
-# the i18n builder cannot share the environment and doctrees with the others
-I18NSPHINXOPTS  = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
-
-.PHONY: help
+# Put it first so that "make" without argument is like "make help".
 help:
-	@echo "Please use \`make <target>' where <target> is one of"
-	@echo "  html       to make standalone HTML files"
-	@echo "  dirhtml    to make HTML files named index.html in directories"
-	@echo "  singlehtml to make a single large HTML file"
-	@echo "  pickle     to make pickle files"
-	@echo "  json       to make JSON files"
-	@echo "  htmlhelp   to make HTML files and a HTML help project"
-	@echo "  qthelp     to make HTML files and a qthelp project"
-	@echo "  applehelp  to make an Apple Help Book"
-	@echo "  devhelp    to make HTML files and a Devhelp project"
-	@echo "  epub       to make an epub"
-	@echo "  epub3      to make an epub3"
-	@echo "  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
-	@echo "  latexpdf   to make LaTeX files and run them through pdflatex"
-	@echo "  latexpdfja to make LaTeX files and run them through platex/dvipdfmx"
-	@echo "  text       to make text files"
-	@echo "  man        to make manual pages"
-	@echo "  texinfo    to make Texinfo files"
-	@echo "  info       to make Texinfo files and run them through makeinfo"
-	@echo "  gettext    to make PO message catalogs"
-	@echo "  changes    to make an overview of all changed/added/deprecated items"
-	@echo "  xml        to make Docutils-native XML files"
-	@echo "  pseudoxml  to make pseudoxml-XML files for display purposes"
-	@echo "  linkcheck  to check all external links for integrity"
-	@echo "  doctest    to run all doctests embedded in the documentation (if enabled)"
-	@echo "  coverage   to run coverage check of the documentation (if enabled)"
-	@echo "  dummy      to check syntax errors of document sources"
-
-.PHONY: clean
-clean:
-	rm -rf $(BUILDDIR)/*
-
-.PHONY: html
-html:
-	$(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
-	@echo
-	@echo "Build finished. The HTML pages are in $(BUILDDIR)/html."
-
-.PHONY: dirhtml
-dirhtml:
-	$(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
-	@echo
-	@echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."
-
-.PHONY: singlehtml
-singlehtml:
-	$(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml
-	@echo
-	@echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml."
-
-.PHONY: pickle
-pickle:
-	$(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
-	@echo
-	@echo "Build finished; now you can process the pickle files."
-
-.PHONY: json
-json:
-	$(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
-	@echo
-	@echo "Build finished; now you can process the JSON files."
-
-.PHONY: htmlhelp
-htmlhelp:
-	$(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
-	@echo
-	@echo "Build finished; now you can run HTML Help Workshop with the" \
-	      ".hhp project file in $(BUILDDIR)/htmlhelp."
-
-.PHONY: qthelp
-qthelp:
-	$(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
-	@echo
-	@echo "Build finished; now you can run "qcollectiongenerator" with the" \
-	      ".qhcp project file in $(BUILDDIR)/qthelp, like this:"
-	@echo "# qcollectiongenerator $(BUILDDIR)/qthelp/Gluon.qhcp"
-	@echo "To view the help file:"
-	@echo "# assistant -collectionFile $(BUILDDIR)/qthelp/Gluon.qhc"
-
-.PHONY: applehelp
-applehelp:
-	$(SPHINXBUILD) -b applehelp $(ALLSPHINXOPTS) $(BUILDDIR)/applehelp
-	@echo
-	@echo "Build finished. The help book is in $(BUILDDIR)/applehelp."
-	@echo "N.B. You won't be able to view it unless you put it in" \
-	      "~/Library/Documentation/Help or install it in your application" \
-	      "bundle."
-
-.PHONY: devhelp
-devhelp:
-	$(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp
-	@echo
-	@echo "Build finished."
-	@echo "To view the help file:"
-	@echo "# mkdir -p $$HOME/.local/share/devhelp/Gluon"
-	@echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/Gluon"
-	@echo "# devhelp"
-
-.PHONY: epub
-epub:
-	$(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub
-	@echo
-	@echo "Build finished. The epub file is in $(BUILDDIR)/epub."
-
-.PHONY: epub3
-epub3:
-	$(SPHINXBUILD) -b epub3 $(ALLSPHINXOPTS) $(BUILDDIR)/epub3
-	@echo
-	@echo "Build finished. The epub3 file is in $(BUILDDIR)/epub3."
-
-.PHONY: latex
-latex:
-	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-	@echo
-	@echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
-	@echo "Run \`make' in that directory to run these through (pdf)latex" \
-	      "(use \`make latexpdf' here to do that automatically)."
-
-.PHONY: latexpdf
-latexpdf:
-	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-	@echo "Running LaTeX files through pdflatex..."
-	$(MAKE) -C $(BUILDDIR)/latex all-pdf
-	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
-
-.PHONY: latexpdfja
-latexpdfja:
-	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-	@echo "Running LaTeX files through platex and dvipdfmx..."
-	$(MAKE) -C $(BUILDDIR)/latex all-pdf-ja
-	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
-
-.PHONY: text
-text:
-	$(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
-	@echo
-	@echo "Build finished. The text files are in $(BUILDDIR)/text."
-
-.PHONY: man
-man:
-	$(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man
-	@echo
-	@echo "Build finished. The manual pages are in $(BUILDDIR)/man."
-
-.PHONY: texinfo
-texinfo:
-	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
-	@echo
-	@echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo."
-	@echo "Run \`make' in that directory to run these through makeinfo" \
-	      "(use \`make info' here to do that automatically)."
-
-.PHONY: info
-info:
-	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
-	@echo "Running Texinfo files through makeinfo..."
-	make -C $(BUILDDIR)/texinfo info
-	@echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo."
-
-.PHONY: gettext
-gettext:
-	$(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale
-	@echo
-	@echo "Build finished. The message catalogs are in $(BUILDDIR)/locale."
-
-.PHONY: changes
-changes:
-	$(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
-	@echo
-	@echo "The overview file is in $(BUILDDIR)/changes."
-
-.PHONY: linkcheck
-linkcheck:
-	$(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
-	@echo
-	@echo "Link check complete; look for any errors in the above output " \
-	      "or in $(BUILDDIR)/linkcheck/output.txt."
-
-.PHONY: doctest
-doctest:
-	$(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
-	@echo "Testing of doctests in the sources finished, look at the " \
-	      "results in $(BUILDDIR)/doctest/output.txt."
-
-.PHONY: coverage
-coverage:
-	$(SPHINXBUILD) -b coverage $(ALLSPHINXOPTS) $(BUILDDIR)/coverage
-	@echo "Testing of coverage in the sources finished, look at the " \
-	      "results in $(BUILDDIR)/coverage/python.txt."
-
-.PHONY: xml
-xml:
-	$(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml
-	@echo
-	@echo "Build finished. The XML files are in $(BUILDDIR)/xml."
+	@$(SPHINXBUILD) -M help "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)
 
-.PHONY: pseudoxml
-pseudoxml:
-	$(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml
-	@echo
-	@echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml."
+.PHONY: help Makefile
 
-.PHONY: dummy
-dummy:
-	$(SPHINXBUILD) -b dummy $(ALLSPHINXOPTS) $(BUILDDIR)/dummy
-	@echo
-	@echo "Build finished. Dummy builder generates no files."
+# Catch-all target: route all unknown targets to Sphinx using the new
+# "make mode" option.  $(O) is meant as a shortcut for $(SPHINXOPTS).
+%: Makefile
+	@$(SPHINXBUILD) -M $@ "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)

docs/conf.py

-#!/usr/bin/env python3
 # -*- coding: utf-8 -*-
 #
-# Gluon documentation build configuration file, created by
-# sphinx-quickstart on Wed Jan 29 00:45:53 2014.
+# Configuration file for the Sphinx documentation builder.
 #
-# This file is execfile()d with the current directory set to its
-# containing dir.
-#
-# Note that not all possible configuration values are present in this
-# autogenerated file.
-#
-# All configuration values have a default; values that are commented out
-# serve to show the default.
+# This file does only contain a selection of the most common options. For a
+# full list see the documentation:
+# http://www.sphinx-doc.org/en/master/config
+
+# -- Path setup --------------------------------------------------------------
 
 # If extensions (or modules to document with autodoc) are in another directory,
 # add these directories to sys.path here. If the directory is relative to the
@@ -21,7 +16,20 @@
 # import sys
 # sys.path.insert(0, os.path.abspath('.'))
 
-# -- General configuration ------------------------------------------------
+
+# -- Project information -----------------------------------------------------
+
+project = 'Gluon'
+copyright = '2015-2019, Project Gluon'
+author = 'Project Gluon'
+
+# The short X.Y version
+version = '2018.2+'
+# The full version, including alpha/beta/rc tags
+release = version
+
+
+# -- General configuration ---------------------------------------------------
 
 # If your documentation needs a minimal Sphinx version, state it here.
 #
@@ -31,7 +39,6 @@
 # extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
 # ones.
 extensions = [
-    'sphinx.ext.mathjax',
 ]
 
 # Add any paths that contain templates here, relative to this directory.
@@ -43,27 +50,9 @@ templates_path = ['_templates']
 # source_suffix = ['.rst', '.md']
 source_suffix = '.rst'
 
-# The encoding of source files.
-#
-# source_encoding = 'utf-8-sig'
-
 # The master toctree document.
 master_doc = 'index'
 
-# General information about the project.
-project = 'Gluon'
-copyright = '2015-2018, Project Gluon'
-author = 'Project Gluon'
-
-# The version info for the project you're documenting, acts as replacement for
-# |version| and |release|, also used in various other places throughout the
-# built documents.
-#
-# The short X.Y version.
-version = '2018.2+'
-# The full version, including alpha/beta/rc tags.
-release = version
-
 # The language for content autogenerated by Sphinx. Refer to documentation
 # for a list of supported languages.
 #
@@ -71,53 +60,16 @@ release = version
 # Usually you set "language" from the command line for these cases.
 language = None
 
-# There are two options for replacing |today|: either, you set today to some
-# non-false value, then it is used:
-#
-# today = ''
-#
-# Else, today_fmt is used as the format for a strftime call.
-#
-# today_fmt = '%B %d, %Y'
-
 # List of patterns, relative to source directory, that match files and
 # directories to ignore when looking for source files.
-# This patterns also effect to html_static_path and html_extra_path
+# This pattern also affects html_static_path and html_extra_path.
 exclude_patterns = ['_build', 'Thumbs.db', '.DS_Store']
 
-# The reST default role (used for this markup: `text`) to use for all
-# documents.
-#
-# default_role = None
-
-# If true, '()' will be appended to :func: etc. cross-reference text.
-#
-# add_function_parentheses = True
-
-# If true, the current module name will be prepended to all description
-# unit titles (such as .. function::).
-#
-# add_module_names = True
-
-# If true, sectionauthor and moduleauthor directives will be shown in the
-# output. They are ignored by default.
-#
-# show_authors = False
-
 # The name of the Pygments (syntax highlighting) style to use.
-pygments_style = 'sphinx'
-
-# A list of ignored prefixes for module index sorting.
-# modindex_common_prefix = []
-
-# If true, keep warnings as "system message" paragraphs in the built documents.
-# keep_warnings = False
-
-# If true, `todo` and `todoList` produce output, else they produce nothing.
-todo_include_todos = False
+pygments_style = None
 
 
-# -- Options for HTML output ----------------------------------------------
+# -- Options for HTML output -------------------------------------------------
 
 # The theme to use for HTML and HTML Help pages.  See the documentation for
 # a list of builtin themes.
@@ -130,132 +82,47 @@ html_theme = 'alabaster'
 #
 # html_theme_options = {}
 
-# Add any paths that contain custom themes here, relative to this directory.
-# html_theme_path = []
-
-# The name for this set of Sphinx documents.
-# "<project> v<release> documentation" by default.
-#
-# html_title = 'Gluon v201x.x+'
-
-# A shorter title for the navigation bar.  Default is the same as html_title.
-#
-# html_short_title = None
-
-# The name of an image file (relative to this directory) to place at the top
-# of the sidebar.
-#
-# html_logo = None
-
-# The name of an image file (relative to this directory) to use as a favicon of
-# the docs.  This file should be a Windows icon file (.ico) being 16x16 or 32x32
-# pixels large.
-#
-# html_favicon = None
-
 # Add any paths that contain custom static files (such as style sheets) here,
 # relative to this directory. They are copied after the builtin static files,
 # so a file named "default.css" will overwrite the builtin "default.css".
-# html_static_path = ['_static']
-
-# Add any extra paths that contain custom files (such as robots.txt or
-# .htaccess) here, relative to this directory. These files are copied
-# directly to the root of the documentation.
 #
-# html_extra_path = []
-
-# If not None, a 'Last updated on:' timestamp is inserted at every page
-# bottom, using the given strftime format.
-# The empty string is equivalent to '%b %d, %Y'.
-#
-# html_last_updated_fmt = None
+# html_static_path = ['_static']
 
-# If true, SmartyPants will be used to convert quotes and dashes to
-# typographically correct entities.
+# Custom sidebar templates, must be a dictionary that maps document names
+# to template names.
 #
-# html_use_smartypants = True
-
-# Custom sidebar templates, maps document names to template names.
+# The default sidebars (for documents that don't match any pattern) are
+# defined by theme itself.  Builtin themes are using these templates by
+# default: ``['localtoc.html', 'relations.html', 'sourcelink.html',
+# 'searchbox.html']``.
 #
 # html_sidebars = {}
 
-# Additional templates that should be rendered to pages, maps page names to
-# template names.
-#
-# html_additional_pages = {}
-
-# If false, no module index is generated.
-#
-# html_domain_indices = True
-
-# If false, no index is generated.
-#
-# html_use_index = True
-
-# If true, the index is split into individual pages for each letter.
-#
-# html_split_index = False
-
-# If true, links to the reST sources are added to the pages.
-#
-# html_show_sourcelink = True
-
-# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
-#
-# html_show_sphinx = True
-
-# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
-#
-# html_show_copyright = True
-
-# If true, an OpenSearch description file will be output, and all pages will
-# contain a <link> tag referring to it.  The value of this option must be the
-# base URL from which the finished HTML is served.
-#
-# html_use_opensearch = ''
-
-# This is the file name suffix for HTML files (e.g. ".xhtml").
-# html_file_suffix = None
-
-# Language to be used for generating the HTML full-text search index.
-# Sphinx supports the following languages:
-#   'da', 'de', 'en', 'es', 'fi', 'fr', 'h', 'it', 'ja'
-#   'nl', 'no', 'pt', 'ro', 'r', 'sv', 'tr', 'zh'
-#
-# html_search_language = 'en'
-
-# A dictionary with options for the search language support, empty by default.
-# 'ja' uses this config value.
-# 'zh' user can custom change `jieba` dictionary path.
-#
-# html_search_options = {'type': 'default'}
 
-# The name of a javascript file (relative to the configuration directory) that
-# implements a search results scorer. If empty, the default will be used.
-#
-# html_search_scorer = 'scorer.js'
+# -- Options for HTMLHelp output ---------------------------------------------
 
 # Output file base name for HTML help builder.
 htmlhelp_basename = 'Gluondoc'
 
-# -- Options for LaTeX output ---------------------------------------------
+
+# -- Options for LaTeX output ------------------------------------------------
 
 latex_elements = {
-     # The paper size ('letterpaper' or 'a4paper').
-     #
-     # 'papersize': 'letterpaper',
+    # The paper size ('letterpaper' or 'a4paper').
+    #
+    # 'papersize': 'letterpaper',
 
-     # The font size ('10pt', '11pt' or '12pt').
-     #
-     # 'pointsize': '10pt',
+    # The font size ('10pt', '11pt' or '12pt').
+    #
+    # 'pointsize': '10pt',
 
-     # Additional stuff for the LaTeX preamble.
-     #
-     # 'preamble': '',
+    # Additional stuff for the LaTeX preamble.
+    #
+    # 'preamble': '',
 
-     # Latex figure (float) alignment
-     #
-     # 'figure_align': 'htbp',
+    # Latex figure (float) alignment
+    #
+    # 'figure_align': 'htbp',
 }
 
 # Grouping the document tree into LaTeX files. List of tuples
@@ -266,40 +133,8 @@ latex_documents = [
      'Project Gluon', 'manual'),
 ]
 
-# The name of an image file (relative to this directory) to place at the top of
-# the title page.
-#
-# latex_logo = None
-
-# For "manual" documents, if this is true, then toplevel headings are parts,
-# not chapters.
-#
-# latex_use_parts = False
-
-# If true, show page references after internal links.
-#
-# latex_show_pagerefs = False
-
-# If true, show URL addresses after external links.
-#
-# latex_show_urls = False
 
-# Documents to append as an appendix to all manuals.
-#
-# latex_appendices = []
-
-# It false, will not define \strong, \code,    itleref, \crossref ... but only
-# \sphinxstrong, ..., \sphinxtitleref, ... To help avoid clash with user added
-# packages.
-#
-# latex_keep_old_macro_names = True
-
-# If false, no module index is generated.
-#
-# latex_domain_indices = True
-
-
-# -- Options for manual page output ---------------------------------------
+# -- Options for manual page output ------------------------------------------
 
 # One entry per manual page. List of tuples
 # (source start file, name, description, authors, manual section).
@@ -308,12 +143,8 @@ man_pages = [
      [author], 1)
 ]
 
-# If true, show URL addresses after external links.
-#
-# man_show_urls = False
 
-
-# -- Options for Texinfo output -------------------------------------------
+# -- Options for Texinfo output ----------------------------------------------
 
 # Grouping the document tree into Texinfo files. List of tuples
 # (source start file, target name, title, author,
@@ -324,18 +155,20 @@ texinfo_documents = [
      'Miscellaneous'),
 ]
 
-# Documents to append as an appendix to all manuals.
-#
-# texinfo_appendices = []
 
-# If false, no module index is generated.
-#
-# texinfo_domain_indices = True
+# -- Options for Epub output -------------------------------------------------
 
-# How to display URL addresses: 'footnote', 'no', or 'inline'.
+# Bibliographic Dublin Core info.
+epub_title = project
+
+# The unique identifier of the text. This can be a ISBN number
+# or the project homepage.
 #
-# texinfo_show_urls = 'footnote'
+# epub_identifier = ''
 
-# If true, do not generate a @detailmenu in the "Top" node's menu.
+# A unique identification for the text.
 #
-# texinfo_no_detailmenu = False
+# epub_uid = ''
+
+# A list of files that should not be packed into the epub file.
+epub_exclude_files = ['search.html']