If no mcast_rate is set for the wifi-iface then there is no rate_idx (0)
set for the bss. This breaks for example 5GHz meshpoint interfaces because
0 maps to a CCK rate (11Mbit/s).

It must also be avoided that the ath10k-ct internal state for the rates is
not synced with the mac80211 rates state. Otherwise, the user specified
rate (e.g. a wifi-iface mcast_rate for a meshpoint interface) will only be
set on startup. And a short while after that, ath10k-ct specific code in
ath10k_check_apply_special_rates is missing a valid rate in its own
structures and is then recalculating a new default rate. This default rate
is in most situations not the requested rate.

Fixes: a399b607 ("ath10k/ath10k-ct: support multicast and management rate control")

5de163d67 vallumd: bump to 0.1.4
b8c2c2b1b mosquitto: update to 1.5.7
8a2d56684 irssi: update to 1.2.0
d0f5ae180 [18.06] python3: fix [CVE-2018-20406]
dad217d34 shadowsocks-libev: flush ss rules on entry
bbc2e68ed mosquitto: bump to 1.5.6
9ffcfea19 mariadb: bump to 10.1.38
09b794ecc stubby: update to version 0.2.4
41c4f82f8 stubby: Remove iamperson347 from maintainer
2cf2210d8 stubby: add Jonathan Underwood as co-maintainer (#7307)
709a73604 stubby: add reload_config to documentation
aa8380721 stubby: fix loading of config file
6e2451dd0 stubby: add uci support to init file
7a2b9df89 stubby: bump PKG_RELEASE
304596d21 stubby: remove unnecessary core limit
fd8505f76 stubby: add SPKI pin set for Cloudflare cert
b77053d35 stubby: add Cloudflare 1.0.0.1 and ::1001 servers
3f17c54f2 stubby: use EDNS client-subnet privacy by default
935126632 stubby: fix config file definition
d3b090a31 stubby: rearrange Makefile for clarity
a3a73ef7b stubby: add missing dependency on ca-certificates
ccf0c71ac getdns: update to version 1.5.0
07e647645 getdns: Remove iamperson347 from maintainer
ca7555e52 getdns: fix missing libbsd dependency
cc8439566 acme: Fix loading credentials
fb3dd71ef youtube-dl: update to version 2019.01.30.1
4368783e9 python-idna: Add missing dependency on python(3)-codecs
480e4d7e8 python/python3: Fix lib2to3 fixes search
02dd97d14 libsndfile: update to 42132c543358cee9f7c3e9e9b15bb6c1063a608e
34dec8190 python3: backport CVE-2018-14647 patch from upstream [18.06]
3785db429 python: backport CVE-2018-14647 patches from upstream [18.06]
8f41fa7f8 nut: Default to run as root but fix alt runas
f7048b725 libsndfile: update to 8ddc442d539ca775d80cdbc7af17a718634a743f a/ulaw: fix multiple buffer overflows
e3f32b75b python/python3: fix .dist-info missing for setuptools and pip

Compile-tested: ramips-mt7621, ar71xx-generic

1be6ff6dc0 kernel: bump 4.14 to 4.14.102
e9cb40caa4 kernel: bump 4.9 to 4.9.159
d32bbd7477 mac80211: brcmfmac: backport 5.0 & 5.1 important changes/fixes
ce3a53c4f6 dnsmasq: prefer localuse over resolvfile guesswork
87fb8aea87 dnsmasq: allow using dnsmasq as the sole resolver
405840631c build: Accept BIN_DIR parameter for legacy-images
bc3eb970ab ar71xx: Fix 5 GHz MAC address for Archer C60 v2
20f1b7d3f5 kernel: bump 4.14 4.14.101
d669be4654 kernel: bump 4.9 to 4.9.158

Compile-tested: ramips-mt7621, ar71xx-generic
Runtime-tested: ramips-mt7621 (D-Link DIR860L B1)

62feabecd8 kernel: bump 4.14 to 4.14.99
9fb3710a8b kernel: bump 4.9 to 4.9.156
e5ace80759 mt76: update to the latest version
fbb2186fbd kernel: bump 4.14 to 4.14.98
72870cc108 kernel: bump 4.9 to 4.9.155
19a6c4b2b3 mac80211: brcmfmac: fix a possible NULL pointer dereference
d997712c71 ath9k: register GPIO chip for OF targets

Compile-tested: ipq40xx, ramips-mt7621
Runtime-tested: none

This package allows to automatically switch to another domain, either
at a given point in time or after the node was offline long enough.

This reverts commit b92e4044.

Committing in this case is unnecessary as that job is already handled by 998-commit
which is in a superior position to commit, as it is run after all relevant changes to
the configuration have been made.

Gluon has multiple ways to obtain unique MAC-addresses. They are either
provided by the WiFi driver or derived from the primary MAC-address.

Quoting the same file:

> It's necessary that the first 45 bits of the MAC address don't
> vary on a single hardware interface, since some chips are using
> a hardware MAC filter. (e.g 'rt305x')

This currently fails in case the rt35xx based chips mac address differs
from the primary MAC. In this case, the MAC address for the client0 radio
(vif 1) comes from the WiFi driver. As there is only a single
MAC-address provided by '/sys/class/ieee80211/phyX/addresses' but the
MAC-address for mesh 0 (vif 2) is derived from the Node-ID, resulting in
different first 45 bits. The WiFi won't come up altogether in this case.

This commit verifies at least 4 MAC-Addresses are provided by the WiFi
driver. If this is not the case, all MAC-addresses are derived from the
primary MAC. This way, affected radios are working correctly.

Drivers with software rate control can directly use the selected multicast
rate for multicast/broadcast frames and the minimal basic rate for
management frames. But drivers with offloaded rate control algorithms must
be informed about such upper layer decisions to configure the
hardware/firmware.

A new BSS_CHANGED_MCAST_RATE is introduced in mac80211 to automatically
inform all drivers. ath10k can detect this event and forward it via WMI to
the driver. The already existing BSS_CHANGED_BASIC_RATES can be used to
select the management rate.

Without the WMI commands, a low rate (not necessarily one from the basic
rates) is used for bcast/mcast/management frames. This means that the
/etc/config/wireless settings basic_rate and mcast_rate would have no
effect on the rates selected by this driver for the mentioned frames.

This backports the TP-Link Archer C50 v4.

We are dropping the following upstream commits. They add support for the
TP-Link recovery-flag which enabled the web-recovery. As they are not
needed for the router to work, we drop them for now.

28cd2ca base-files: sysupgrade: support additional mtd options
1e06482 mtd: add logic for TP-Link ramips recovery magic

also added manifest aliases for gl-ar150, gl-ar300m, gl-ar750

This allows for smaller firmware images and makes it possible to reset a
device via firstboot command.

Signed-off-by: Matthias Fritzsche <matthias@chemnitz.freifunk.net>

It makes sense to render using the same theme locally that is used on RTD.
The theme can be installed using:

    pip install sphinx_rtd_theme

9b14c7d3d1 netifd: handle hotplug event socket errors
e33612484a brcm63xx: HG655b: fix the imagetag at dts
ef17edae3d kernel: bump 4.14 to 4.14.97
21762fe9d6 kernel: bump 4.9 to 4.9.154
ab41836321 mt76: update to the latest version
026f08a610 kernel: bump 4.14 to 4.14.96
1f1f421af6 kernel: bump 4.9 to 4.9.153

Compile-tested: ar71xx-generic, ramips-mt7621, x86-64

13eeee7b2b mt76: update to the latest version
ac1ce25671 OpenWrt v18.06.2: revert to branch defaults
a02809f61b OpenWrt v18.06.2: adjust config defaults
cddd7b4c77 base-files: config_get: prevent filename globbing
e6162b2127 dnsmasq: backport missing braces fix
d4178c8f47 build: fix umask detection bashism
b98b55a64f build: fix STAGING_DIR cleaning for packages
e6c2f3feb1 ar71xx: use correct wan mac address for the TP-Link Archer C7 v4
2c7a1ccaea ar71xx: Add usb drivers in Archer C7 v4/v5 images
39c3b5139f openssl: bump to 1.0.2q
80ed6ebc56 dnsmasq: backport upstream static lease fix
4f2199f528 wireguard: bump to 0.0.20190123
8c105c62e4 wireguard: Update to snapshot 0.0.20181218
1447924c95 mbedtls: update to 2.14.1 for 18.06
e5a0b6cde0 uhttpd: disable concurrent requests by default
11bfb39e39 kernel: bump 4.14 to 4.14.95
dd5fa217dc kernel: bump 4.9 to 4.9.152
91d3b87353 uboot-fritz4040: fix crash caused by interaction with gcc 7.1+

Compile-tested: ar71xx-generic, mpc85xx-generic, ramips-mt7621
Runtime-tested: ramips-mt7621 (D-Link DIR860L)

ath5k supports only IEEE 802.11 a/b/g

Signed-off-by: Matthias Fritzsche <matthias@chemnitz.freifunk.net>

Signed-off-by: Matthias Fritzsche <matthias@chemnitz.freifunk.net>

ea345d1 Merge pull request #442 from ecsv/batadv-18.06
0231308 batman-adv: Merge bugfixes from 2019.0

Compile-tested: ar71xx-{tiny,generic}, ramips-mt7621, x86-64
Runtime-tested: ar71xx-generic (TP-Link TL-WR1043NDv2)

6e16dd1234 mt76: update to the latest version
76037756d0 kernel: bump 4.14 to 4.14.94
455bfd1065 kernel: bump 4.9 to 4.9.151
fafd7691e6 opkg: update to latest Git head
e789bd2243 opkg: drop argument from check_signature in opkg.conf
3603c2321d ramips: mt7621: fix 5GHz WiFi LED on ZBT WG3526
7f98cd8d50 odhcpd: fix onlink IA check (FS#2060)
abd0f7995e kmod-sched-cake: bump to latest cake

Compile-tested: ar71xx-{tiny,generic}, ramips-mt7621, x86-64

fixes #1629

this matches the output of
lua -e 'print(require(platform_info).get_image_name())'

This way the manifest file is accepted by the autoupdater

The original commit only applied its changes to the source file and did
not rebuild the minified file, therefore the change never went live.

939fa07b04 kernel: bump 4.14 to 4.14.93
cae263227f kernel: bump 4.9 to 4.9.150
f34ad1a8f0 mt76: update to the latest version
d58c6aedb6 tools/firmware-utils: fix sysupgrade typo in mkdapimg2
0cef35f096 tools/firmware-utils: fix sysupgrade typo in mkdapimg
0d6eaa0ba5 octeon: fix typo in platform.sh
069fda746e fstools: update to the latest master branch
3b4e779e93 fstools: update to git HEAD
d7275c0312 fstools: filter unknown action in mount.hotplug script
e0daa62af6 fstools: Install mount.hotplug and 10-fstab.defaults as 600
4c0e15fc16 base-files: install missing /etc/iproute2/ematch_map
c3fef269d6 cns3xxx: use actual size reads for PCIe
367ccf7a2d kernel: bump 4.14 to 4.14.91
b9dcf2de5f kernel: bump 4.9 to 4.9.148
a8cc06c537 mac80211: brcmfmac: backport firmware loading changes & fix memory bugs
c5c20f510a odhcpd: noop to fix PKG_SOURCE_DATE
62ddfaff32 odhcpd: filter routes based on prefix_filter
8a9b0b95df apm821xx: switch MX60(W)'s recovery images to multi-image method
afcdf099b7 kernel: fix f2fs on big endian machines
016a71a18a odhcpd: backport prefix filter/NETEV_ADDR6LIST_CHANGE event fixes
806b570a35 ath10k: update QCA4019 firmware
baa00b2182 brcm2708-gpu-fw: update to git HEAD
5af6b7976f bcm53xx: backport DTS changes queued for the 4.21
dbbba84ed4 bcm53xx: rename dts backport patches changing their prefixes

Compile-tested: ar71xx, ramips-{mt7621,mt76x8}, x86-64
Runtime-tested: ramips-mt7621 (D-Link DIR860L)

The text was changed in the i18n files, but the corresponding change in the
Lua sources seemingly got lost during a rebase.

Closes #1611