Newer
Older
Site
====
The ``site`` consists of the files ``site.conf`` and ``site.mk``.
In the first community based values are defined, which both are processed
during the build process and runtime.
The last is directly included in the make process of Gluon.
Configuration
-------------
The ``site.conf`` is a lua dictionary with the following defined keys.
hostname_prefix
A string which shall prefix the default hostname of a device.
site_name
The name of your community.
site_code
The code of your community. It is good practice to use the TLD of
your community here.
prefix4
The IPv4 Subnet of your community mesh network in CIDR notation, e.g.
::
prefix4 = '10.111.111.0/18'
prefix6
The IPv6 subnet of your community mesh network, e.g.
::
prefix6 = 'fdca::ffee:babe:1::/64'
timezone
The timezone of your community live in, e.g.
::
-- Europe/Berlin
timezone = 'CET-1CEST,M3.5.0,M10.5.0/3'
ntp_server
List of NTP servers available in your community or used by your community, e.g.:
::
ntp_servers = {'1.ntp.services.ffeh','2.tnp.services.ffeh'}
opkg_repo : optional
Overwrite the default ``opkg`` repository server, e.g.:
::
opkg_repo = 'http://opkg.services.ffeh/attitude_adjustment/12.09/%S/packages'
The `%S` is a variable, which is replaced with the platform of an device
during the build process.
regdom
The wireless regulatory domain responsible for your area, e.g.:
WLAN configuration for 2.4 GHz devices.
``channel`` must be set to a valid wireless channel for your radio.
``htmode`` selects the desired htmode (e.g. HT20, HT40- or HT40+).
There are currently three interface types available. You many choose to
configure any subset of them:
- ``ap`` creates a master interface where clients may connect
- ``mesh`` creates an 802.11s mesh interface with forwarding disabled
- ``ibss`` creates an ad-hoc interface
Each interface may be disabled by setting ``disabled`` to ``true``.
This will only affect new installations.
Upgrades will not changed the disabled state.
``ap`` requires a single parameter, a string, named ``ssid`` which sets the interface's ESSID.
``mesh`` requires a single parameter, a string, named ``id`` which sets the mesh id.
``ibss`` requires two parametersr: ``ssid`` (a string) and ``bssid`` (a MAC).
An optional parameter ``vlan`` (integer) is supported.
Both ``mesh`` and ``ibss`` accept an optional ``mcast_rate`` (kbit/s) parameter for setting the default multicast datarate.
htmode = 'HT20',
ap = {
ssid = 'entenhausen.freifunk.net',
},
mesh = {
id = 'entenhausen-mesh',
mcast_rate = 12000,
},
ibss = {
ssid = 'ff:ff:ff:ee:ba:be',
bssid = 'ff:ff:ff:ee:ba:be',
mcast_rate = 12000,
},
},
wifi5
Same as `wifi24` but for the 5Ghz radio.
next_node : package
Configuration of the local node feature of Gluon
::
next_node = {
ip4 = '10.23.42.1',
ip6 = 'fdca:ffee:babe:1::1',
mesh : optional
Options specific to routing protocols.
At the moment, only the ``batman_adv`` routing protocol has such options:
The optional value ``gw_sel_class`` sets the gateway selection class. The default
class 20 is based on the link quality (TQ) only, class 1 is calculated from
both the TQ and the announced bandwidth.
::
mesh = {
batman_adv = {
gw_sel_class = 1,
},
}
Matthias Schiffer
committed
Remote server setup for the fastd-based mesh VPN.
The `enabled` option can be set to true to enable the VPN by default.
If `configurable` is `false` or unset, the method list will be replaced on updates
Matthias Schiffer
committed
with the list in the site configuration. Setting `configurable` to `true` will allow the user to
add the method ``null`` to the front of the method list or remove ``null`` from it,
and make this change survive updates. Settings configurable is necessary for the
package `gluon-luci-mesh-vpn-fastd`, which adds a UI for this configuration.
In any case, the ``null`` method should always be the first method in the list
if it is supported at all. You should only set `configurable` to `true` if the
configured peers support both the ``null`` method and methods with encryption.
Matthias Schiffer
committed
-- configurable = true,
mtu = 1280,
Matthias Schiffer
committed
groups = {
backbone = {
Matthias Schiffer
committed
peers = {
peer1 = {
key = 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX',
remotes = {'ipv4 "vpn1.entenhausen.freifunk.net" port 10000'},
},
}
mesh_on_wan : optional
Enables the mesh on the WAN port (``true`` or ``false``).
mesh_on_lan : optional
Enables the mesh on the LAN port (``true`` or ``false``).
autoupdater : package
Configuration for the autoupdater feature of Gluon.
::
autoupdater = {
branch = 'experimental',
branches = {
stable = {
name = 'stable',
mirrors = {
'http://[fdca:ffee:babe:1::fec1]/firmware/stable/sysupgrade/',
'http://[fdca:ffee:babe:1::fec2]/firmware/stable/sysupgrade/',
},
good_signatures = 2,
pubkeys = {
'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX', -- someguy
'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX', -- someother
}
}
}
}
Kokel
committed
roles : optional
Optional role definitions. With this nodes will announce their role inside the mesh.
In the backend this adds the facility to distinguish between normal, backbone and
service nodes or even gateways (if they advertise the role, also). It is up to
the community which roles to define. See the section below as an example.
``default`` takes the default role which is set initially. This value should be
part of ``list``. If you want node owners to change the role via config mode add
the package ``gluon-luci-node-role`` to ``site.mk``.
The strings to display in the LuCI interface can be configured per language in the
``i18n/en.po``, ``i18n/de.po``, etc. files of the site repository using message IDs like
``gluon-luci-node-role:role:node`` and ``gluon-luci-node-role:role:backbone``.
Kokel
committed
::
roles = {
default = 'node',
list = {
'node',
'test',
'backbone',
'service',
Kokel
committed
},
},
Uplink traffic control, ingress and egress values are specified in kbit/s.
simple_tc = {
mesh_vpn = {
ifname = 'mesh-vpn',
limit_egress = 200,
limit_ingress = 3000,
},
},
setup_mode : package
Allows skipping setup mode (config mode) at first boot when attribute
``skip`` is set to ``true``. This is optional and may be left out.
::
legacy : package
Configuration for the legacy upgrade path.
This is only required in communities upgrading from Lübeck's LFF-0.3.x.
::
legacy = {
version_files = {'/etc/.freifunk_version_keep', '/etc/.eff_version_keep'},
old_files = {'/etc/config/config_mode', '/etc/config/ffeh', '/etc/config/freifunk'},
config_mode_configs = {'config_mode', 'ffeh', 'freifunk'},
fastd_configs = {'ffeh_mesh_vpn', 'mesh_vpn'},
mesh_ifname = 'freifunk',
tc_configs = {'ffki', 'freifunk'},
wifi_names = {'wifi_freifunk', 'wifi_freifunk5', 'wifi_mesh', 'wifi_mesh5'},
}
Packages
--------
The ``site.mk`` is a Makefile which should define constants
involved in the build process of Gluon.
GLUON_SITE_PACKAGES
Defines a list of packages which should installed additional
to the ``gluon_core`` package.
GLUON_RELEASE
The current release version Gluon should use.
GLUON_PRIORITY
The default priority for the generated manifests (see the autoupdater documentation
for more information).
GLUON_LANGS
List of languages (as two-letter-codes) to include for the web interface. Should always contain
``en``.
Config mode texts
-----------------
The community-defined texts in the config mode are configured in PO files in the ``i18n`` subdirectory
of the site configuration. The message IDs currently defined are:
gluon-config-mode:welcome
Welcome text on the top of the config wizard page.
gluon-config-mode:pubkey
Information about the public VPN key on the reboot page.
gluon-config-mode:reboot
General information about the reboot page.
There is a POT file in the site example directory which can be used to create templates
for the language files. The command ``msginit -l en -i ../../docs/site-example/i18n/gluon-site.pot``
can be used from the ``i18n`` directory to create an initial PO file called ``en.po`` if the ``gettext``
utilities are installed.
.. note::
An empty ``msgstr``, as is the default after running ``msginit``, leads to
the ``msgid`` being printed as-is. It does *not* hide the whole text, as
might be expected.
Depending on the context, you might be able to use comments like
``<!-- empty -->`` as translations to effectively hide the text.
site.mk
^^^^^^^
.. literalinclude:: ../site-example/site.mk
:language: makefile
site.conf
^^^^^^^^^
.. literalinclude:: ../site-example/site.conf
:language: lua
i18n/en.po
^^^^^^^^^^
.. literalinclude:: ../site-example/i18n/en.po
:language: po
i18n/de.po
^^^^^^^^^^
.. literalinclude:: ../site-example/i18n/de.po
:language: po
modules
^^^^^^^
.. literalinclude:: ../site-example/modules
:language: makefile
site-repos in the wild
^^^^^^^^^^^^^^^^^^^^^^
This is a non-exhaustive list of site-repos from various communities:
* `site-ffbs <https://github.com/ffbs/site-ffbs>`_ (Braunschweig)
* `site-ffhb <https://github.com/FreifunkBremen/gluon-site-ffhb>`_ (Bremen)
* `site-ffda <https://github.com/freifunk-darmstadt/site-ffda>`_ (Darmstadt)
* `site-ffgoe <https://github.com/freifunk-goettingen/site-ffgoe>`_ (Göttingen)
* `site-ffhh <https://github.com/freifunkhamburg/site-ffhh>`_ (Hamburg)
* `site-ffhgw <https://github.com/lorenzo-greifswald/site-ffhgw>`_ (Greifswald)
* `site-ffhl <https://github.com/freifunk-luebeck/site-ffhl>`_ (Lübeck)
* `site-ffmd <https://github.com/FreifunkMD/site-ffmd>`_ (Magdeburg)
* `site-ffmwu <https://github.com/freifunk-mwu/site-ffmwu>`_ (Mainz, Wiesbaden & Umgebung)
* `site-ffmyk <https://github.com/FreifunkMYK/site-ffmyk>`_ (Mayen-Koblenz)
* `site-ffm <https://github.com/freifunkMUC/site-ffm>`_ (München)
* `site-ffms <https://github.com/FreiFunkMuenster/site-ffms>`_ (Münster)
* `site-ffnw <https://git.freifunk-ol.de/root/siteconf.git>`_ (Nordwest)
* `site-ffpb <https://git.c3pb.de/freifunk-pb/site-ffpb>`_ (Paderborn)
* `site-ffka <https://github.com/ffka/site-ffka>`_ (Karlsruhe)
* `site-ffrl <https://github.com/ffrl/sites-ffrl>`_ (Rheinland)
* `site-ffrg <https://github.com/ffruhr/site-ffruhr>`_ (Ruhrgebiet)
* `site-ffs <https://github.com/freifunk-stuttgart/site-ffs>`_ (Stuttgart)
* `site-fftr <https://github.com/freifunktrier/site-fftr>`_ (Trier)