f97d2351e2c1 ath79: remove ath10k drivers from Archer C7 v1 profile
7c321e00dd19 kernel: nf_conntrack_rtcache: fix WARNING on rmmod
2a2f9ffe81ce kernel: nf_conntrack_rtcache: fix WARNING on forward path

6160f773fef2 ipq40xx: add support for AVM FRITZ!Repeater 1200
63b1e8f8d226 ipq-wifi: add AVM FRITZ!Repeater 1200 bdf
496489ea95af uboot-fritz4040: update to latest HEAD
e30ca0d90a98 mac80211: update to version 4.19.85
b1ef0e443720 layerscape: Fix kernel patch
ad0463c2e875 kernel: Add missing configuration option
b0adf79c9e7c firewall: update to latest Git HEAD
b41619592792 firewall: update to latest git HEAD
3685f86cefac cns3xxx: use proper macros for defining partition regions
db345220b485 kernel: bump 4.14 to 4.14.155
538ca42ddad8 wireless-regdb: fix build when python2 from package feeds exists
2751c5c75219 wireless-regdb: fix patch fuzz
d6ecadb05c2b wireless-regdb: fix Makefile indentation
0a4071b550eb wireless-regdb: set PKGARCH:=all
e8d528af7e91 wireless-regdb: prefer python provided by make variable
53d8de0207e8 wireless-regdb: Make it build with python2
f2ef9b4feafe wireless-regdb: update to 2019.06.03
8fac0b398c34 ar71xx: fix buttons for TP-Link TL-WDR4900 v2
3c65c47ce6fd ar71xx: fix LED setup for TL-WDR4900 v2
b6c80f85cb7b ramips: set uImage name of WeVO 11AC NAS and W2914NS v2
e945c43142ab ar71xx: fix MAC address setup for TL-WDR4900 v2
8a21bc36229d ar71xx: fix MAC addresses for Archer C5 v1, C7 v1/v2, WDR4900 v2

With the removal of IBSS support, Gluon doesn't use ath10k-ct anymore, so
we can drop this patch.

As of OpenWrt commit b3d8b3ab8e6f ("mac80211: set noscan=1 if sta/adhoc/
mesh interfaces are present"), the issue workarounded by this patch cannot
occur anymore.

This seems to unbreak bootloader image generation with certain shells /
build setups.

Fixes #1766

Instead of unconditionally loading this module on boot the gluon_bat0
netifd protocol script will later take care of loading either the
batman-adv or batman-adv-legacy module, depending on the configured routing
algorithm in UCI.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

This reverts commit 8dd13cbb.

Fixes #1756

This reverts commit 3d3617ed.

This updates the batman-adv OpenWrt package to the current version
provided in the master branch of the openwrt-routing packages
repository:

* e26096a batman-adv: Fix duplicated OGMs on NETDEV_UP
* 1ff00ee batman-adv: upgrade package to latest release 2019.2

Small difference to the original:

* Compat code for batadv_genl_dump_check_consistent()
* Compat code for cfg80211_sinfo_release_content()
* 0001-batman-adv-add-compat-hacks.patch kept
* batctl dependency kept removed
* config related files unchanged

The new config format was not backported yet to keep this patch small
and less invasive.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>

The factory firmware omits the JFFS2 end-marker while flashing via
web-interface. Add a 64k padding after the marker fixes this problem.

When the end-marker is not present, OpenWRT won't save the overlayfs
after initial flash.

This always pulls in the batman-adv compat 15 kernel module. However,
batctl works just as well with batman-adv-legacy (compat 14).

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>

patches/openwrt: refresh 0006-generic-vxlan-backport-support-for-VXLAN-over-link-local-IPv6-to-4.9.patch (#1663)

If no mcast_rate is set for the wifi-iface then there is no rate_idx (0)
set for the bss. This breaks for example 5GHz meshpoint interfaces because
0 maps to a CCK rate (11Mbit/s).

It must also be avoided that the ath10k-ct internal state for the rates is
not synced with the mac80211 rates state. Otherwise, the user specified
rate (e.g. a wifi-iface mcast_rate for a meshpoint interface) will only be
set on startup. And a short while after that, ath10k-ct specific code in
ath10k_check_apply_special_rates is missing a valid rate in its own
structures and is then recalculating a new default rate. This default rate
is in most situations not the requested rate.

Fixes: a399b607 ("ath10k/ath10k-ct: support multicast and management rate control")

Drivers with software rate control can directly use the selected multicast
rate for multicast/broadcast frames and the minimal basic rate for
management frames. But drivers with offloaded rate control algorithms must
be informed about such upper layer decisions to configure the
hardware/firmware.

A new BSS_CHANGED_MCAST_RATE is introduced in mac80211 to automatically
inform all drivers. ath10k can detect this event and forward it via WMI to
the driver. The already existing BSS_CHANGED_BASIC_RATES can be used to
select the management rate.

Without the WMI commands, a low rate (not necessarily one from the basic
rates) is used for bcast/mcast/management frames. This means that the
/etc/config/wireless settings basic_rate and mcast_rate would have no
effect on the rates selected by this driver for the mentioned frames.

This backports the TP-Link Archer C50 v4.

We are dropping the following upstream commits. They add support for the
TP-Link recovery-flag which enabled the web-recovery. As they are not
needed for the router to work, we drop them for now.

28cd2ca base-files: sysupgrade: support additional mtd options
1e06482 mtd: add logic for TP-Link ramips recovery magic

6e16dd1234 mt76: update to the latest version
76037756d0 kernel: bump 4.14 to 4.14.94
455bfd1065 kernel: bump 4.9 to 4.9.151
fafd7691e6 opkg: update to latest Git head
e789bd2243 opkg: drop argument from check_signature in opkg.conf
3603c2321d ramips: mt7621: fix 5GHz WiFi LED on ZBT WG3526
7f98cd8d50 odhcpd: fix onlink IA check (FS#2060)
abd0f7995e kmod-sched-cake: bump to latest cake

Compile-tested: ar71xx-{tiny,generic}, ramips-mt7621, x86-64

50789acf4e ar71xx: add support for UniFi-AC-Mesh-Pro
40e1450f59 kernel: bump 4.14 to 4.14.88
85f42a74d3 kernel: bump 4.9 to 4.9.145

Compile-tested: ar71xx-generic, ramips-mt7620, ipq40xx

6f74e269c8 kernel: bump 4.14 to 4.14.87
b2f243394e kernel: bump 4.9 to 4.9.144
2213b20aee kernel: bump 4.14 to 4.14.86
bcd7644007 kernel: bump 4.9 to 4.9.143
d5afaa4114 openvpn: re-add option comp_lzo
629073e86d rpcd: update to latest Git head
1cd945ea22 ramips: fix leds on GL.iNet GL-MT300N-V2
fbadfecbb5 ipq40xx: fix openmesh sysupgrade with tar content out of order
06a20afb34 rules.mk: fix syntax error
d40e90986c rules.mk: add INSTALL_SUID macro
d40de11d1b base-files: fix prerm return value, align with postinst code
cc8e875039 sdk: find kernel modules when KDIR is a symlink
a8b292afe6 uhttpd: update to latest Git head
7a8b75375c uhttpd: support multiple Lua prefixes
fede6df09e uhttpd: update to latest Git head
9671a2d2c8 apm821xx: MBL: load kernel/dtb from SATA 0:1 first
26ebcc88e3 apm821xx: wndr4700: restore sd-card media detection
5337319bdf uclient: update to latest Git head

Compile-tested: ar71xx, ipq40xx, x86-64
Runtime-tested: ar71xx

Signed-off-by: Christoph Krapp <achterin@googlemail.com>

ath10k-ct uses a rather high number of buffers to communicate with the
QCA/Candelatech firmware. Especially the HTC (host-target-communication)
and HTT (host-target-transport) can take up a lot of memory when data is
transferred over a ath10k wifi link.

Even a 256MB device with three radios can go OOM (while sending to three
devices using UDP unicast/multicast packets) with the default buffer
limits. Unfortunately, this also reduced the maximum 5GHz throughput on an
IPQ40xx device from 494/432 Mbit/s for TCP transfers (download/upload) to
438/343 Mbit/s. These throughput values should still be good enough for a
Freifunk installation. And these changes are already used by ath10k in
OpenWrt 18.06.

0d549271d397 ar71xx: fix TP-Link Archer C7 v5 switch LEDs
dd6d554b2c1e kernel: fix ubifs loosing O_TMPFILE data after power cut
4db74fbd6908 kernel: bump 4.14 to 4.14.81
6f388adef820 kernel: bump 4.9 to 4.9.137
b0d08ec3aef3 sunxi: remove kernel 4.9 support

Signed-off-by: Martin Weinelt <martin@darmstadt.freifunk.net>

bc7abe8729f3 include/kernel-build.mk: fix kernel rebuild on backport patch changes
c99c70e05303 kernel: backport page fragment API changes from 4.10+ to 4.9