This allows us to make use of builders that can't run virtual machines.

Drop the TMUX environemnt variable, it's not needed anymore.

This summaries giving an overview of a scripts function and a short summary
how it's doing this. Only the scripts are covered, that are used by the
Freifunk-Berlin firmwarebuiler too.

[Matthias Schiffer: slightly reworded some descriptions]

9cafcbe0bd ar71xx: correct button type for TL-MR3020 mode slider
2bd1cf92e9 ar71xx: fix splitting firmware partition for TL-WR902AC v1
c963e4267b qos-scripts: fix interface resolving
31de4a40e7 broadcom-wl: don't inherit lock descriptor in nas process

This allows for multiple mesh legs out of one box. Useful for offloaders
and networks using vlan for separate mesh transport.
Custom mesh interfaces in a VXLAN domain are otherwise firewalled.

This fixes #1479

A microsecond is commonly abbreviated as µs. This prevents confusions
between micro- (µs) and milliseconds (ms).

This adds support for the beacon interval to be set on a per-band base.
This has the potential to reduce the amount of airtime used up for
sending beacon frames.

[Matthias Schiffer: fix up start/stop order and file permissions]

Look up primary MAC address through board.json for LAN/WAN

Separate wireless-related helper methods from the util module to a
new wireless module. This keeps them separated, as the amount of
wireless helpers increased in the past, justifying a separate module.

xt_CT was added to kmod-ipt-conntrack a while back. Update our
GLUON_SPECIALIZE_KERNEL rules accordingly.

When building xt_CT into the kernel, one of the symbols IP_NF_RAW and
IP6_NF_RAW must be enabled as well, even though there is no runtime
dependency when building as modules. The kernel grows by less than 1KB
even when both IP_NF_RAW and NETFILTER_XT_TARGET_CT are enabled, making
this change a (very slight) net win in both flash and RAM usage.

In OpenWrt 19.07, the block size was increased to 1024KiB for "tiny"
devices by default to save flash. Unfortunately, this also significantly
increases the cache memory required by squashfs.

In my test, the increased block size reduced the image size by ~64KiB,
but increased the RAM usage by ~2.6MiB. As most tiny devices have only
32MiB of RAM, this is not a reasonable tradeoff.

The ar71xx-generic target already defines an even lower block size of
64KiB.

This is unused by Gluon.

83b714a27f musl: fix locking synchronization bug
f99b1d1d92 rpcd: update to latest openwrt-19.07 Git HEAD
92bd395b04 Revert "rpcd: update to latest Git HEAD"
adf5d753ef rpcd: update to latest Git HEAD
9b48375c7e libubox: update to the latest version
a4e8eca03e libubox: update to the latest master
498f1f4f5d ramips: gsw_mt7621: disable PORT 5 MAC RX/TX flow control by default
d8d1956a80 hostapd: backport wolfssl bignum fixes
ab7e9754df ucert: update to latest git HEAD
bc0c2db2a3 brcm47xx: disable Netgear WNR2000 v2 by default
059db419d7 squashfs: Fix compile with GCC 10
97b522a1f9 usign: update to latest git HEAD
942262f9c8 usign: update to latest Git HEAD
6a89098935 ath79: add support for TP-Link TL-WA901ND v4 and v5
a6f70f2e97 ath79: add support for TP-Link TL-WA701ND/730RE/801ND/901ND v1
8c6c488e9e ath79: add support for TP-Link TL-WR940N v6
36d4140517 ath79: add support for TP-Link TL-WA830RE v1
7187826b8b ath79: reorganize DTSI for ar7240 TP-Link devices
d4092eac1f ath79: migrate TP-Link TL-MR3420v2 to ath79
24cfd961d9 ath79: add support for TP9343-based TP-Link TL-WR94x devices
7de43d66ff generic: platform/mikrotik: disambiguate SPDX-License-Identifier
84154574c8 ramips: drop non-existant ralink,port-map for Ravpower WD03
af667c73c5 bcm63xx: mask interrupts on init
d1ce73677c bcm63xx: periph_intc: report effective affinity
1d40c8a9f2 bcm63xx: ext_intc: fix warning
65f2fae911 bcm63xx: periph_intc: fix warning
b2c9f82eb4 bcm63xx: redboot: fix warning
a2a3ac9f51 bcm63xx: bcm6362: fix pinctrl bug
6c96ecf3b4 bcm63xx: refresh kernel config
c3e3802a8e OpenWrt v19.07.3: revert to branch defaults
f3f38f40da OpenWrt v19.07.3: adjust config defaults
85e04e9f46 generic: platform/mikrotik: fix LZOR support
4cd9ae41c5 libjson-c: backport security fixes
6ffd4d8a4d ar71xx: remove hard-coded folder name from Mikrotik RB upgrade
d2ee15ef76 fstools: blockd: fix segfault triggered by non-autofs mounts
4cd44e5dc7 ar71xx: mikrotik: mach-rbspi.c remove wlan id
3fecb06fb1 ar71xx: mikrotik: bypass id check in __rb_get_wlan_data()
b36aa168d8 ar71xx: mikrotik: ath10k: use new sysfs driver
fa2369e59b generic: platform/mikrotik: support LZOR encoding
612b64e6c4 ar71xx: enable mikrotik platform driver
511859de9b generic: mikrotik platform build bits
ddae86cc69 generic: routerboot sysfs platform driver
2efcfb1d1a kernel: bump 4.14 to 4.14.180
ecea10f2b9 ath79: dts: add missing 'serial0' alias for TP-Link TL-MR3040v2

Closes #1974

Situation:
==========

$ ls -l /lib/gluon/domains/lindennord.json
lrwxrwxrwx    1 root     root            10 Jan  6 03:42 /lib/gluon/domains/lindennord.json -> dom17.json

Before:
=======

$ gluon-neighbour-info -d ::1 -p 1001 -r nodeinfo -c 1
{
   "node_id": "525400123456",
   "system": {
     "domain_code": "lindennord",
     "site_code": "ffh"
   },
...
}

After:
======

$ gluon-neighbour-info -d ::1 -p 1001 -r nodeinfo -c 1
{
   "node_id": "525400123456",
   "system": {
     "primary_domain_code": "dom17",
     "domain_code": "lindennord",
     "site_code": "ffh"
   },
...
}

Implemented using readlink() and basename() to the selected domain in
/lib/gluon/domains/${DOMAIN}.json.

Add x86-legacy subtarget

As x86-generic is compiled to pentium4 (and newer) there is a need for
a subtarget for older devices. The x86-legacy subtarget is set to
compile to pentium (and newer) and should support even very old devics.

x86-legacy includes the packages from x86.inc to only maintain one
package list. The three excludes are because the packages do not exist
for x86-legacy.

- Rely on shebang instead of setting shell in workflow
- Run whole install-dependencies.sh in sudo
- Use /bin/sh instead of bash
- set -e

The new step is added with `if: ${{ !cancelled() }}`, so the logs are
stored even when the build fails.

build: ignore deactivated feeds

Reuse outdoor device logic for setup mode interface selection, plus some cleanup

The OpenWrt feeds.conf.defaults contains some feeds that are commented out
and not active. Such feeds will be returned by the default_feeds.sh script
anyway and causing pseudo feeds. Limit the script to only return active
feeds, by filtering out lines starting with '#'.
This usually only applies to the OpenWrt master branch.

Signed-off-by: Sven Roederer <freifunk@it-solutions.geroedel.de>

change as per NeoRider

As a partial fix to #496, do not touch the MAC address of the WAN
interface when using VXLANs (as only the MAC address of the VXLAN
interface matters to batman-adv).

This reverts commit 2a8943e5.

.SILENT gets passed down to OpenWrt make as -s through MAKEFLAGS. This
hides certain messages from the build log with V=s.

Certain error message (for example invalid package names) were emitted
once for each device.

gluon-mesh-vpn-fastd: clean up peers and groups on update

config_ifname was renamed to setup_ifname in Gluon v2015.1.

On PoE-powered devices, we usually want to use WAN for the setup mode.
As all outdoor devices are PoE-powered, we can reuse this function. This
switches the setup mode interface for new installations / after config
reset on a few devices that were missing in this list before.