Fixes commit fb8cd562 ("modules: update OpenWrt")

(cherry picked from commit 604087fa)

Some newer MT7628 based routers (notably the TP-Link Archer C50 v4) are
shipped with a chip-id of 0x7600 in the on-flash EEPROM. Add this as a
possible valid ID.

This fixes unstable WiFi on some units of the TP-Link Archer C50 v4.

b515edb775 ipq40xx: essedma: Disable TCP segmentation offload for IPv6
f7f15f8033 ath79: wndr3700 series: fix wifi range & throughput
1f5cbd6be7 ca-certificates: update to version 20200601
fa72f2646a oxnas: build with 8021Q VLAN support
e752fc1ff9 ath79: add support for TP-Link TL-WR802N V1 and V2
6488d2f7cc ath79: update WA/XC devices UBNT_VERSION to 8.5.3
fb79e5d9fe ipq806x: EA8500 fix boot partition detection
e36bdd5dc5 ath79: fix LEDs for GL.inet GL-AR150
21454a772b ar71xx: fix reset key for TP-Link TL-WR802N V1/V2
a32b0ec4cf generic: fix flow table hw offload

Closes #2055

(cherry picked from commit 2be6fe32)

When the GTK is offloaded, MT7610 won't transmit any multicast frames.
This is most likely due to a bug in the offloading datapath. MT7612 is
not affected.

Disable GTK offloading for now. It can be re-enabled once the bug in the
offloading path is fixed.

Signed-off-by: David Bauer <mail@david-bauer.net>

This gives us WPA3 support out of the box without having to manually disable
hardware crypto. The driver will fall back to software crypto if the connection
requires management frame protection.

THis allows us to use WPA3 features (Private-WiFi SAE & OWE) on
ramips-mt7620.

83b714a27f musl: fix locking synchronization bug
f99b1d1d92 rpcd: update to latest openwrt-19.07 Git HEAD
92bd395b04 Revert "rpcd: update to latest Git HEAD"
adf5d753ef rpcd: update to latest Git HEAD
9b48375c7e libubox: update to the latest version
a4e8eca03e libubox: update to the latest master
498f1f4f5d ramips: gsw_mt7621: disable PORT 5 MAC RX/TX flow control by default
d8d1956a80 hostapd: backport wolfssl bignum fixes
ab7e9754df ucert: update to latest git HEAD
bc0c2db2a3 brcm47xx: disable Netgear WNR2000 v2 by default
059db419d7 squashfs: Fix compile with GCC 10
97b522a1f9 usign: update to latest git HEAD
942262f9c8 usign: update to latest Git HEAD
6a89098935 ath79: add support for TP-Link TL-WA901ND v4 and v5
a6f70f2e97 ath79: add support for TP-Link TL-WA701ND/730RE/801ND/901ND v1
8c6c488e9e ath79: add support for TP-Link TL-WR940N v6
36d4140517 ath79: add support for TP-Link TL-WA830RE v1
7187826b8b ath79: reorganize DTSI for ar7240 TP-Link devices
d4092eac1f ath79: migrate TP-Link TL-MR3420v2 to ath79
24cfd961d9 ath79: add support for TP9343-based TP-Link TL-WR94x devices
7de43d66ff generic: platform/mikrotik: disambiguate SPDX-License-Identifier
84154574c8 ramips: drop non-existant ralink,port-map for Ravpower WD03
af667c73c5 bcm63xx: mask interrupts on init
d1ce73677c bcm63xx: periph_intc: report effective affinity
1d40c8a9f2 bcm63xx: ext_intc: fix warning
65f2fae911 bcm63xx: periph_intc: fix warning
b2c9f82eb4 bcm63xx: redboot: fix warning
a2a3ac9f51 bcm63xx: bcm6362: fix pinctrl bug
6c96ecf3b4 bcm63xx: refresh kernel config
c3e3802a8e OpenWrt v19.07.3: revert to branch defaults
f3f38f40da OpenWrt v19.07.3: adjust config defaults
85e04e9f46 generic: platform/mikrotik: fix LZOR support
4cd9ae41c5 libjson-c: backport security fixes
6ffd4d8a4d ar71xx: remove hard-coded folder name from Mikrotik RB upgrade
d2ee15ef76 fstools: blockd: fix segfault triggered by non-autofs mounts
4cd44e5dc7 ar71xx: mikrotik: mach-rbspi.c remove wlan id
3fecb06fb1 ar71xx: mikrotik: bypass id check in __rb_get_wlan_data()
b36aa168d8 ar71xx: mikrotik: ath10k: use new sysfs driver
fa2369e59b generic: platform/mikrotik: support LZOR encoding
612b64e6c4 ar71xx: enable mikrotik platform driver
511859de9b generic: mikrotik platform build bits
ddae86cc69 generic: routerboot sysfs platform driver
2efcfb1d1a kernel: bump 4.14 to 4.14.180
ecea10f2b9 ath79: dts: add missing 'serial0' alias for TP-Link TL-MR3040v2

d9244a1b5b generic: ar8216: fix unknown packet flooding for ar8229/ar8236
429e4490c4 libpcap: fix library packaging issues
e678cb1595 kernel: bump 4.14 to 4.14.179
8fa4ed9ef7 fstools: update to the latest version
5c6dfb5bc0 fstools: update to the latest version
607809dcdc mac80211: Update to version 4.19.120
96d280cc37 scripts/download: add sources CDN as first mirror
55ccb04046 upgs: Remove extra _DEFAULT_SOURCE definition
ee480c50c1 dante: Fix compile with glibc
5f0e25d966 perf: build with NO_LIBCAP=1
005adba939 mac80211: ath10k: increase rx buffer size to 2048
0974d59b5f kernel: backport fix for non-regular inodes on f2fs
f40947a8c0 ath79: indicate boot/failsafe/upgrade for NanoBeam/Nanostation AC
65cf72d5d2 ath79: add SUPPORTED_DEVICES based on ar71xx for some devices
f9ef0c5705 kernel: bump 4.14 to 4.14.178
2df0ea042d wpad-wolfssl: fix crypto_bignum_sub()
ec6cb33452 mac80211: backport fix for an no-ack tx status issue
f141cdd200 hostapd: unconditionally enable ap/mesh for wpa-cli
54b6683390 wireless-regdb: backport three upstream fixes
55591e63bc curl: backport fix for CVE-2019-15601
35ea808b97 uboot-kirkwood: fix ethernet and usb

Compile-tested: all targets

This patch fixes a regression introduced in kernel v4.14. While the
commit message only mentions a performance penalty, the issue is
suspected to be the cause of spurious data bus errors on MIPS CPUs
(ar71xx target).

Fixes: #1982

Before, only frames with a maximum size of 1528 bytes could be
transmitted between two 802.11s nodes.

For batman-adv for instance, which adds its own header to each frame,
we typically need an MTU of at least 1532 bytes to be able to transmit
without fragmentation.

This patch now increases the maxmimum frame size from 1528 to 1656
bytes.

Tested with two ath10k devices in 802.11s mode, as well as with
batman-adv on top of 802.11s with forwarding disabled.

Fix originally found and developed by Ben Greear.

f97d2351e2c1 ath79: remove ath10k drivers from Archer C7 v1 profile
7c321e00dd19 kernel: nf_conntrack_rtcache: fix WARNING on rmmod
2a2f9ffe81ce kernel: nf_conntrack_rtcache: fix WARNING on forward path

6160f773fef2 ipq40xx: add support for AVM FRITZ!Repeater 1200
63b1e8f8d226 ipq-wifi: add AVM FRITZ!Repeater 1200 bdf
496489ea95af uboot-fritz4040: update to latest HEAD
e30ca0d90a98 mac80211: update to version 4.19.85
b1ef0e443720 layerscape: Fix kernel patch
ad0463c2e875 kernel: Add missing configuration option
b0adf79c9e7c firewall: update to latest Git HEAD
b41619592792 firewall: update to latest git HEAD
3685f86cefac cns3xxx: use proper macros for defining partition regions
db345220b485 kernel: bump 4.14 to 4.14.155
538ca42ddad8 wireless-regdb: fix build when python2 from package feeds exists
2751c5c75219 wireless-regdb: fix patch fuzz
d6ecadb05c2b wireless-regdb: fix Makefile indentation
0a4071b550eb wireless-regdb: set PKGARCH:=all
e8d528af7e91 wireless-regdb: prefer python provided by make variable
53d8de0207e8 wireless-regdb: Make it build with python2
f2ef9b4feafe wireless-regdb: update to 2019.06.03
8fac0b398c34 ar71xx: fix buttons for TP-Link TL-WDR4900 v2
3c65c47ce6fd ar71xx: fix LED setup for TL-WDR4900 v2
b6c80f85cb7b ramips: set uImage name of WeVO 11AC NAS and W2914NS v2
e945c43142ab ar71xx: fix MAC address setup for TL-WDR4900 v2
8a21bc36229d ar71xx: fix MAC addresses for Archer C5 v1, C7 v1/v2, WDR4900 v2

With the removal of IBSS support, Gluon doesn't use ath10k-ct anymore, so
we can drop this patch.

As of OpenWrt commit b3d8b3ab8e6f ("mac80211: set noscan=1 if sta/adhoc/
mesh interfaces are present"), the issue workarounded by this patch cannot
occur anymore.

This seems to unbreak bootloader image generation with certain shells /
build setups.

Fixes #1766

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

The factory firmware omits the JFFS2 end-marker while flashing via
web-interface. Add a 64k padding after the marker fixes this problem.

When the end-marker is not present, OpenWRT won't save the overlayfs
after initial flash.

patches/openwrt: refresh 0006-generic-vxlan-backport-support-for-VXLAN-over-link-local-IPv6-to-4.9.patch (#1663)

If no mcast_rate is set for the wifi-iface then there is no rate_idx (0)
set for the bss. This breaks for example 5GHz meshpoint interfaces because
0 maps to a CCK rate (11Mbit/s).

It must also be avoided that the ath10k-ct internal state for the rates is
not synced with the mac80211 rates state. Otherwise, the user specified
rate (e.g. a wifi-iface mcast_rate for a meshpoint interface) will only be
set on startup. And a short while after that, ath10k-ct specific code in
ath10k_check_apply_special_rates is missing a valid rate in its own
structures and is then recalculating a new default rate. This default rate
is in most situations not the requested rate.

Fixes: a399b607 ("ath10k/ath10k-ct: support multicast and management rate control")

Drivers with software rate control can directly use the selected multicast
rate for multicast/broadcast frames and the minimal basic rate for
management frames. But drivers with offloaded rate control algorithms must
be informed about such upper layer decisions to configure the
hardware/firmware.

A new BSS_CHANGED_MCAST_RATE is introduced in mac80211 to automatically
inform all drivers. ath10k can detect this event and forward it via WMI to
the driver. The already existing BSS_CHANGED_BASIC_RATES can be used to
select the management rate.

Without the WMI commands, a low rate (not necessarily one from the basic
rates) is used for bcast/mcast/management frames. This means that the
/etc/config/wireless settings basic_rate and mcast_rate would have no
effect on the rates selected by this driver for the mentioned frames.

This backports the TP-Link Archer C50 v4.

We are dropping the following upstream commits. They add support for the
TP-Link recovery-flag which enabled the web-recovery. As they are not
needed for the router to work, we drop them for now.

28cd2ca base-files: sysupgrade: support additional mtd options
1e06482 mtd: add logic for TP-Link ramips recovery magic

6e16dd1234 mt76: update to the latest version
76037756d0 kernel: bump 4.14 to 4.14.94
455bfd1065 kernel: bump 4.9 to 4.9.151
fafd7691e6 opkg: update to latest Git head
e789bd2243 opkg: drop argument from check_signature in opkg.conf
3603c2321d ramips: mt7621: fix 5GHz WiFi LED on ZBT WG3526
7f98cd8d50 odhcpd: fix onlink IA check (FS#2060)
abd0f7995e kmod-sched-cake: bump to latest cake

Compile-tested: ar71xx-{tiny,generic}, ramips-mt7621, x86-64

50789acf4e ar71xx: add support for UniFi-AC-Mesh-Pro
40e1450f59 kernel: bump 4.14 to 4.14.88
85f42a74d3 kernel: bump 4.9 to 4.9.145

Compile-tested: ar71xx-generic, ramips-mt7620, ipq40xx