ath79-generic: (re)add RE450 v1
ath79-generic: (re)add RE355 v1

Note: Buffalo has introduced hardware changes without bumping the
revision number. 19.07 did not support the rb-variant so there's no need
to implement a migration for the rb-variant.
Every g300nh supported by Gluon should either be the s-variant or
been flashed wrongly.

Gone due to
commit 45c84a11 ("ar71xx: drop target")

ath79-nand: migrate wndr3700v4

Gone due to
commit 45c84a11 ("ar71xx: drop target")

Gone due to
commit 45c84a11 ("ar71xx: drop target")

Gone due to
commit 45c84a11 ("ar71xx: drop target")

ath79-generic: (re)add support for ALFA Network AP121F

Gone due to
commit 45c84a11 ("ar71xx: drop target")

Note that it was wrongly marked as device class tiny in
commit 7fd7116e ("targets: add device-class flags") in the past,
the device has 64MB RAM and not 32MB.

Also, the device has no "led-running" assigned in DTS. The device has
three LEDs: "green:vpn", "green:lan" and "green:wlan". The first LED,
"green:vpn", has a "V" icon and was used to show the VPN connection
status in the vendor firmware. This LED will be used via the newly
added "led-boot" fallback in gluon-setup-mode. But will be unused
during normal operation due to the unassigned "led-running" in DTS.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>

for devices in targets that do no implement `get_status_led` in /etc/diag.sh
and do not have an led-running in their dts

Gone due to
commit 45c84a11 ("ar71xx: drop target")

Specifications:
* SoC: AR7242 (Virian 400MHz)
* RAM: 64 MB DDR (W9751G6JB-25)
* Flash: 16MB SPI flash (S25FL129PIF)
* WiFi: AR9382 (2.4/5GHz) + 2x SE2595L
* LAN: 1x1000M (PEF7071V)

To install via EVA bootloader, a FTP connection need to be
established to 192.168.178.1 within the first seconds after power on:

  ftp> quote USER adam2
  ftp> quote PASS adam2
  ftp> binary
  ftp> debug
  ftp> passive
  ftp> quote MEDIA FLSH
  ftp> put lede-ar71xx-generic-fritz300e-squashfs-sysupgrade.bin mtd1

Depending on the source of the primary MAC address, uppercase digits
would be used on some devices. Convert the address to lowercase for
consistency.

We only change the case for newly configured nodes to avoid changing the
node ID and derives MAC addresses for existing installations.

modules: update to latest HEAD

The Ubiquiti UniFi 6 LR now has a v2 with a different LED setup, thus
the previous model was added a v1 suffix.

Signed-off-by: David Bauer <mail@david-bauer.net>

The ip6tables-legacy metapackage was renamed to ip6ables-zz-legacy.

69afa34 bird2: bump to version 2.0.10

1123b9dae travelmate: update 2.0.9
a686f7975 xtables-addons: update to 3.21
d50620e22 xtables-addons: update to 3.20
9b1569377 xtables-addons: add PKG_LICENSE_FILES and use SPDX
1c4e8a14e xtables-addons: fix various warning in lua patch
4a5633b6b xtables-addons: update to 3.19
736996ecb Revert "gcc: update 11 minor version"
d45c8f4c0 collectd: Fix various issues with lantiq dsl metrics.
6e49bec96 unbound: update to 1.16.0
f93755c93 yt-dlp: add package
e846059b1 youtube-dl: drop package
ed2234c1e glib2: replace intl patch with upstream solution
45f10a3be glib2: update libintl handling
19d957cfc glib2: update to 2.70.5
e1598040f openwisp-monitoring: added 0.1.1
dcc80b42c openwisp-config: update to 1.0.1
95acc51cd yq: Update to 4.25.3
3743870bc acme: switch from iptables to nft
d845c3dc3 travelmate: update 2.0.8-3
5651f6a3e gcc: update 11 minor version
d713c4b4d gcc: depend on libzstd
e32d33a2a gcc: update to allow compiling different versions
90e5bfd4f gcc: change maintainer

f854de6ada OpenWrt v22.03.0-rc5: revert to branch defaults
0345c613ba OpenWrt v22.03.0-rc5: adjust config defaults
bfd070e7fa kernel: Add missing mediatek configuration options
5c7aed8b1e openssl: bump to 1.1.1p
6b78bf1fd8 mediatek: mt7622: fix white dome LED of UniFi 6 LR
5a82803c76 mvebu: cortexa72: fix ImageBuilder for IEI Puzzle devices
fa56db5ccc uboot-mediatek: update UniFi 6 LR board name
d302839b65 mediatek: add Ubiquiti UniFi 6 LR v2 targets
d815e1f67c mediatek: new target ubnt_unifi-6-lr-v1-ubootmod
8f0d8869d5 mediatek: new target mt7622-ubnt-unifi-6-lr-v1
1d96f6863e mediatek: build ubnt-ledbar as a module
2bea35cb55 mediatek: remove crypto-hw-mtk package
5a81e00063 mediatek: mt7622: fix banana pi r64 wps button
e459a87eaf mediatek/mt7629: Activate CONFIG_ARM_ARCH_TIMER_EVTSTREAM
fcd62930f7 mt76: update to the latest version
ee67afeda9 kernel: Refresh patches for all targets
32e9095662 mt76: update to the latest version
a3946a7cd1 mac80211: fix mesh queue selection issue
158a5af801 ramips: improve YunCore AX820 LEDs
6b44a6e731 kernel: bump 5.10 to 5.10.127
66da295f5a kernel: bump 5.10 to 5.10.126
7d6b8f5bdf qoriq: enable Book-E Watchdog Timer
85b5bad5a1 ipq40xx: cut ath10k board file for mikrotik subtarget
973ff0b8e8 ipq40xx: mikrotik: dont include ath10k-board-qca4019 by default
3e38bd1353 ipq-wifi: remove packaged BDF-s for MikroTik devices
80602d472a ipq40xx: mikrotik: provide BDF-s on demand
02cfd1f5a8 mac80211: ath10k: backport bus and device specific API 1 BDF selection
52a64755fc ath10k-ct: update to 2022-05-13
1edf306b31 firewall4: bump to git HEAD
e222660bc8 qoriq: enable HARDENED_USERCOPY
9296d8970a qoriq: disable CONFIG_COMPAT
c9448285f1 qoriq: 02_network fix sweth globbing logic
04091ffd68 qoriq: define reset button for Firebox M300
c7673625d9 qoriq: define leds for Firebox M300
d6a06e1d18 ath79: add support for RouterBOARD mAP
344ecf433a ipq40xx: mikrotik: make RouterBoot partition writeable
fbbc127f42 ath79: mikrotik: add rw soft_config to extra devices
993b70a429 kernel: fix variable erasesize patch
656036a534 x86: 64: Add kmod-igc to default packages
fb3b927643 iptables: default to ip(6)tables-nft
e4caacc887 kernel: add missing symbol to 5.10 config
7c240ee279 qoriq: use FIT uImage for Firebox M300 kernel
88101fa239 qoriq: use KERNEL_SUFFIX in Build/sdcard-img
2b8021d614 kernel: bump 5.10 to 5.10.125
f2f03545d4 kernel: bump 5.10 to 5.10.124
50db012243 kernel: bump 5.10 to 5.10.123
4faf889e7e kernel: bump 5.10 to 5.10.122
81530d69ef kernel: bump 5.10 to 5.10.121
d8d8b82c59 dropbear: cherry-pick upstream commit 544f28a0
f91b0d7a92 wolfssl: disable AES-NI by default for x86_64
2b392383e6 x86: fix damaged config 5.10 refresh
9c609080b0 generic: enable CRYPTO_LIB_BLAKE2S[_X86|_ARM]
63b4881fcb include/prereq-build.mk: macOS cross build improvements
d989124c02 broadcom-wl: Fix compilation with kernel 5.10
d8f8c78d96 464xlat: delete SNATed conntracks on interface teardown
049093b9fd mediatek: UniFi 6 LR: disable RTC
d65ad3efa5 ramips: decrease SPI frequency for Phicomm K2P
267f86a7b2 wireless-regdb: bump to 2022.06.06
7e223a89a1 prereq-build: add additional git detection
08e1812900 mac80211: increase airtime scheduler quantum
aab535d2bb mac80211: add airtime fairness improvements

lantiq-xrx200: allow updates from swconfig to DSA

Only restore the netifd proto for the WAN bridge in case the upgrade is
done from an older Gluon version.

For DSL targets, OpenWrt defaults the WAN proto to pppoe, while Gluon
uses the Ethernet ports for WAN. When unconditionally preserving the WAN
proto, pppoe is carried over to Gluon's network config.

Signed-off-by: David Bauer <mail@david-bauer.net>

Co-Authored-By: J. Burfeind <github@aiyionpri.me>

Co-authored-by: Tim-Niklas Koch <info@tnkoch.de>
Co-authored-by: J. Burfeind <github@aiyionpri.me>

Gluon does not support usage of the integrated ADSL modem, thus
DSL-related packages can be removed.

Signed-off-by: David Bauer <mail@david-bauer.net>

Update the device-support version for image-metadata so that older Gluon
versions not implementing skipping minor compat-version checks are able
to update to newer Gluon versions.

Signed-off-by: David Bauer <mail@david-bauer.net>

There was never a device with a dedicated WAN port supported in Gluon
which could make use of such a workaround.

As the only relevant lantiq-xrx200 target now uses swconfig anyways,
we can remove this workaround.

Signed-off-by: David Bauer <mail@david-bauer.net>

Gone due to
commit 45c84a11 ("ar71xx: drop target")

04d2b6f sse-multiplex: fix pipe FD leaks

ramips-mt7621: enable swconfig to DSA migration

modules: update to latest HEAD

Add a migration script to migrate the device path of PCIe WiFi hardware
from OpenWrt 19.07 to the one used with OpenWrt 21.02+.

Signed-off-by: David Bauer <mail@david-bauer.net>

Set the compat-version of the sysupgrade image to 1.0 in order to allow
upgrades from Gluon-sources which are based on swconfig and do not
ignore mismatching minor compat-versions.

Signed-off-by: David Bauer <mail@david-bauer.net>

1735768 olsrd: replace patch for storms with real patch

4c4ac1b58 travelmate: update 2.0.8-2
ddf610ca4 syslog-ng: update to version 3.37.1
34dc9074f dnsdist: switch from liblua to luajit
6c942ec7f Revert "lxc: export systemd cgroups after install"
345ae974b lxc: export systemd cgroups after install
6a89a690f libreswan: update to 4.7
a5765aa29 nfdump: update to 1.6.24
70d787c82 knot-resolver: update to version 5.5.1
40c2ef8c7 travelmate: update 2.0.8
26481ea6c luajit: backport softfloat ppc support

a4390ea283 apm821xx: WNDAP660: fix ethernet port ordering
7bc1d76419 ramips: mt7621-dts: fix claiming rgmii2 pin group for EdgeRouter X SFP
d01e374074 ramips: force ZyXEL NR7101 to boot from "Kernel" partition
b9d67e2608 ath79: fix rootfs padding for D-Link DAP-2xxx
4130e7ed54 mpc85xx: p2020: add RTC ds1307 to kernel
d929abbbde bcm53xx: remove 07_set_preinit_iface_bcm53xx
c1868ef656 tools/libressl: update to version 3.4.3
8a3fb45722 netfilter: kmod-nft-xfrm
43fd8f4aba libusb: fix missing link
f608779f92 mt76: update to the latest version
daa8d7e32d realtek: make "u-boot-env" partition writable for Netgear 3xx series
c32dfc7fe0 realtek: make Netgear GS1xx u-boot env partition writable

b804281 autoupdater: ignore minor compat-version

gluon-core: split dual lan devices

Fix make lint