We don't support VLANs on 11s interfaces, so the workaround can be dropped
with the IBSS support.

As of OpenWrt commit b3d8b3ab8e6f ("mac80211: set noscan=1 if sta/adhoc/
mesh interfaces are present"), the issue workarounded by this patch cannot
occur anymore.

many AVM devices do not have RESET/WPS buttons. So use the otherwise unused DECT/PHONE button to boot the device into setup mode.

This patch allows to enter the setup-mode by pressing the phone button
(often labeled as DECT) in addition to WPS and reset button.

This patch is necessary to allow supporting boards without a WPS and reset
button (e.g. AVM FRITZ!Box 7312).

This commit removes the broken flag for the ipq806x-generic target,
as the first device (NETGEAR R7800) now has full support in Gluon

d6d9f58290 ipq806x: use switch trigger for WAN LED on NETGEAR boards
bee28adf6e hostapd: enable PMKSA and OK caching for WPA3-Personal
5d6308ecae scripts/dl_github_archive.py: fix python3 str, bytes confusion

Fixes: 4249d65a ("treewide: fix luacheck warnings")
Closes: #1851

This commit accounts for the target renaming which was done in upstream
commit 7407e723991 ("ipqx0xx: add Generic subtarget")

This commit accounts for the target renaming which was done in upstream
commit 7407e723991 ("ipqx0xx: add Generic subtarget")

22c443c20c uboot-fritz4040: build with ipq40xx "generic" subtarget
7407e72399 ipqx0xx: add Generic subtarget
9b2a147cfe ramips: enable external amplifier for D-Link DIR-810L
e539dc2daa ath79: Clean up GL-AR300M DTS/DTSI inclusions
8f0deedc11 ramips: fix WiFi MAC addresses for D-Link DIR-810L
f051a967b8 libevent2: Update to 2.1.11
466d499d03 rpcd: update to latest Git HEAD
7f29dc0fda kernel: bump 4.14 to 4.14.151
2436e521b4 kernel: mark kmod-usb-serial-wwan as hidden
79e6391600 kernel: bump 4.14 to 4.14.150
c51a39d4a5 mac80211: add an improved moving average algorithm to minstrel

Their kernel partition is too small, the OpenWrt build system
is unable to create an image.

This changes the ath10k firmware and driver selection, as
ath10k-ct is now the default in upstream OpenWrt.

However, for 802.11s operation we need the QCA firmware and driver.

With this commit, the status-led is set to be the "led-running"
device-tree alias for targets which do not implement the get_status_led
method in /etc/diag.sh.

This is necessary, as wpad-basic conflicts with hostapd-mini.

Upstream commit 5eb7864a changed the method name for host-key
generation.

This adds previously absent ath10k packages definitions. This way,
devices correctly select CandelaTech firmware correctly, when
GLUON_WLAN_MESH is set to IBSS.

This is also necessary for all devices, when OpenWrt is switched to
19.07.

fixes #1834
fixes #1332

The OCEDO Koala was missing the correct package definition. Because of
this, firmware is potentially built with the wrong ath10k firmware /
driver.

specify command 'dump' for now until babeld supports filtering

increase size of path by 1 to be able to fit the full path including trailing \0 byte into array

de7b228 batman-adv-legacy: remove the package
85c8044 l3roamd: update to fix build
295f055 l3roamd: bump version: instant claiming, FIX removing routes

Merge tag to fix 'git describe'

also properly delete location data when a user disables
the location option after re-entering config-mode.