Merge pull request #2809 from AiyionPrime/master-v2022.1.3-fp

docs: Add v2022.1.3 release notes

docs/releases/index.rst

@@ -5,6 +5,7 @@ Release Notes
   :caption: Gluon 2022.1
   :maxdepth: 2
 
+  v2022.1.3
   v2022.1.2
   v2022.1.1
   v2022.1

docs/releases/v2022.1.3.rst

+Gluon 2022.1.3
+==============
+
+Bugfixes
+--------
+
+* Ipq40xx Wave2 devices temporarily use non-ct firmware again to work around 802.11s unicast package loss in ath10k-ct
+  (`#2692 <https://github.com/freifunk-gluon/gluon/issues/2692>`_)
+
+* Modify kernel builds slightly to work around a boot hang on various devices based on the QCA9563 SoC - especially the Unifi AC-* devices
+  (`#2784 <https://github.com/freifunk-gluon/gluon/issues/2784>`_)
+
+* Work around an issue with wifi setup timing by waiting a bit while device initialisation is ongoing
+  (`#2779 <https://github.com/freifunk-gluon/gluon/issues/2779>`_)
+
+
+Known issues
+------------
+
+* Upgrading EdgeRouter-X from versions before v2020.1.x may lead to a soft-bricked state due to bad blocks on the NAND flash which the NAND driver before this release does not handle well.
+  (`#1937 <https://github.com/freifunk-gluon/gluon/issues/1937>`_)
+
+* The integration of the BATMAN_V routing algorithm is incomplete.
+
+  - Mesh neighbors don't appear on the status page. (`#1726 <https://github.com/freifunk-gluon/gluon/issues/1726>`_)
+    Many tools have the BATMAN_IV metric hardcoded, these need to be updated to account for the new throughput
+    metric.
+  - Throughput values are not correctly acquired for different interface types.
+    (`#1728 <https://github.com/freifunk-gluon/gluon/issues/1728>`_)
+    This affects virtual interface types like bridges and VXLAN.
+
+* Default TX power on many Ubiquiti devices is too high, correct offsets are unknown
+  (`#94 <https://github.com/freifunk-gluon/gluon/issues/94>`_)
+
+  Reducing the TX power in the Advanced Settings is recommended.
+
+* In configurations without VXLAN, the MAC address of the WAN interface is modified even when Mesh-on-WAN is disabled
+  (`#496 <https://github.com/freifunk-gluon/gluon/issues/496>`_)
+
+  This may lead to issues in environments where a fixed MAC address is expected (like VMware when promiscuous mode is disallowed).