v2022.1.4.rst

Gluon 2022.1.4

Added hardware support

ath79-generic

• LibreRouter
  • LibreRouter (v1)
• Teltonika
  • RUT230 (v1)

ath79-nand

• Aerohive
  • HiveAP 121
• NETGEAR
  • WNDR4300 (v1)

lantiq-xrx200

• Arcadyan
  • o2 Box 6431

ramips-mt7621

• Cudy
  • X6 (v1, v2)
• D-Link
  • DAP-X1860 (A1)
• GL.iNet
  • GL-MT1300
• Mercusys
  • MR70X (v1)
• Xiaomi
  • Mi Router 3G

ramips-mt76x8

• TP-Link
  • RE200 (v3)

realtek-rtl838x

• D-Link
  • DGS-1210-10P

ipq40xx-generic

• AVM
  • FRITZ!Box 7520

ipq40xx-mikrotik

• Mikrotik
  • hAP ac2

Bugfixes

• Enterasys WS-AP3705i now uses the correct image-name for use with the autoupdater (#2819)
• Reduce memory Usage for ath10k on ZyXEL WRE6606 devices (#2842)
• Replace the Workaround for failed boots on ath79 with a proper fix. (#2784)
• AVM FRITZ!Box 7360 v2 flashed with the incorrect image for v1 will automatically update to the correct image.
• Revert OOM inducing switch of ath79 Wave2 firmware back to -ct (#2879)

Known issues

• Upgrading EdgeRouter-X from versions before v2020.1.x may lead to a soft-bricked state due to bad blocks on the NAND flash which the NAND driver before this release does not handle well. (#1937)

• The integration of the BATMAN_V routing algorithm is incomplete.

  • Mesh neighbors don't appear on the status page. (#1726) Many tools have the BATMAN_IV metric hardcoded, these need to be updated to account for the new throughput metric.
  • Throughput values are not correctly acquired for different interface types. (#1728) This affects virtual interface types like bridges and VXLAN.

• Default TX power on many Ubiquiti devices is too high, correct offsets are unknown (#94)

  Reducing the TX power in the Advanced Settings is recommended.

• In configurations without VXLAN, the MAC address of the WAN interface is modified even when Mesh-on-WAN is disabled (#496)

  This may lead to issues in environments where a fixed MAC address is expected (like VMware when promiscuous mode is disallowed).