Hardware specification:
- SOC: Qualcomm QCA9563 @ 775MHz
- Flash: GigaDevice GD25Q64CSIG (8MiB)
- RAM: Zentel A3R1GE40JBF (128 MiB DDR2)
- Ethernet: Qualcomm QCA8337N: 4x 1Gbps LAN + 1x 1Gbps WAN
- Wireless:
  - 2.4GHz (bgn) QCA9563 integrated (3x3)
  - 5GHz (ac) Qualcomm QCA9886 (2x2)
- Button: 1x power, 1x reset, 1x wps
- LED: 6x LEDs: power, wlan2g, wlan5g, lan, wan, wps
- UART: There's no UART header on the board

This commit removes the broken flag for the ipq806x-generic target,
as the first device (NETGEAR R7800) now has full support in Gluon

This commit accounts for the target renaming which was done in upstream
commit 7407e723991 ("ipqx0xx: add Generic subtarget")

Their kernel partition is too small, the OpenWrt build system
is unable to create an image.

The kernel partition on these devices is too small for the
OpenWrt 19.07 kernel. It is also located after the rootfs, so
we cannot grow it further.

Therefore mark these devices as deprecated now.

Fixes #1718

It seems this was changed by accident.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>

gluon-hoodselector docs: replace 'Router have' with 'Router has'

gluon-hoodselector: docs: fix spelling/grammar

docs: gluon-hoodselector.rst, chnage 'VPN-mode' to VPN mode and 'trigon polygon' to triangle

Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>

docs/package/gluon-hoodselector: update .dia and .svg to current code behave

Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>

docs/package/gluon-hoodselector: replace hood with domain update doc to current code behave

Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>

docs hoodselector: fix spelling

Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>

docs/package/gluon-hoodselector: fix spelling second round

Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>

docs:gluon-hoodselector.rst: fix spelling

Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>

docs gluon-hoodselector.rst: fix line length

Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>

docs gluon-hoodselector: rename doc imports to be assoziated with the hoodselector

docs gluon-hoodselector: fix image name and rst inmport

Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>

docs gluon-hoodselector: information without es (uncountable)

Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>

docs/package: gluon-hoodselector.rst fix grammer issues

Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>

This device doesn't have an Ethernet port, and even with the Ethernet
shield, eth0 is not configured.

renamed by 210d97c5

was marked as broken by #1526 cause of #1505

- A Picostation M5 never existed
- TL-WR710N v1 and v2.1 are part of ar71xx-generic not ar71xx-tiny

This backports the TP-Link Archer C50 v4.

We are dropping the following upstream commits. They add support for the
TP-Link recovery-flag which enabled the web-recovery. As they are not
needed for the router to work, we drop them for now.

28cd2ca base-files: sysupgrade: support additional mtd options
1e06482 mtd: add logic for TP-Link ramips recovery magic

This commit removes the broken flag from all devices in the mt76x8
subtarget.

The stability of the mt76 driver for the mt7628 and mt7612 has greatly
improved in the last half-year. It might be still behind ath9k and
ath10k but it is suitable for daily use.

This affects the following devices:

 - GL.iNet MT300N v2
 - TP-Link Archer C50 v3
 - TP-Link TL-WR841 v13

Signed-off-by: Martin Weinelt <martin@darmstadt.freifunk.net>

Adds a footnote with a link to an instruction on how to flash Gluon onto
AVM routers.

Signed-off-by: David Bauer <mail@david-bauer.net>