This increases the size of the root filesystem when GLUON_DEBUG is
enabled. Otherwise, the filesystem is too small.

Closes #1907

The Aruba Instant On AP11 is the Aruba AP-303 with a stripped-down
firmware. Add an alias for the device to remove confusion about the
different naming.

Remove the ath10k-ct-smallbuffers variant from the default
package-seleciton as it clashes with the QCA ath10k driver.

f8543adb14 mt76: update to the latest openwrt-19.07 version
bce5342fb6 mt76: fix incorrect firmware path

594f731e04 ramips: fix Archer C20i wireless MAC address
037a151c56 ramips: fix Archer C2 v1 5GHz MAC address
3e8b66e0da ramips: add system LED indicators for TP-Link C20i
80e0b97d07 ramips: convert TP-Link MT7620 boards to tpt trigger
a2e2c40b5e mt76: update to the latest openwrt-19.07 version
1f927bd2f0 ramips: fix inverted reset button for Ravpower WD03

Compile-tested: ramips-mt7621
Run-tested: ramips-mt7621

(cherry picked from commit 1e66cd90)

7ab5dc77b2 ramips: add LED trigger for TL-WR902AC v3 WAN LED
ad4b939bd0 rt2x00: add throughput LED trigger
91dde4291c mac80211: fix build without CONFIG_PCI
30301dfcf0 mac80211: add patch to include local BSS rx time in survey information
da7dde8993 mac80211: add pcie apsm backport changes
62d5ece70b ramips: remove bogus ralink,mtd-eeprom with offset 0x4
94153971bb ipq40xx: use ath10k-ct-smallbuffers for 128 MiB devices
d13c6d078e kernel: bump 4.14 to 4.14.160
f80272dd9c kernel: bump 4.14 to 4.14.159
3030abfa7e ath79: use ath10k-ct-smallbuffers for 64 MiB devices
36057763fa ath10k-firmware: Add kmod-ath10k-ct-smallbuffers to depends
450b306e54 kernel: ath10k-ct: provide a build variant for small RAM devices
e50d44d985 fstools: update to latest git HEAD
6a151d6558 fstools: update to latest git HEAD
43c5927312 fstools: bump to version 2019-11-03
f7779d64ba fstools: update to latest Git HEAD
ab7386bd67 libubox: bump to version 2019-10-29
c34499a6e4 libubox: update to latest git HEAD
7203a58d7b kernel: remove LINUX_4_9 dependency of kmod-dax
0c07224b5a scripts/dowload.pl: add archive.apache.org to apache mirror list
4fba5dc103 kernel: fix *-gpio-custom module unloading
df45ef5436 cmake: Install host packages to lib instead of lib64
6351205d73 adb: fix for SuperSpeed devices
d2e87c7800 toolchain/gcc: Backport patch to fix unconditional MULTIARCH_DIRNAME
a7d880e830 toolchain/gcc: correct the check expr for newer clang
3a863da268 lantiq: fix phys led
18107f4481 uhttpd: reset PKG_RELEASE
414ea30927 uhttpd: update to latest Git HEAD
27eea24921 ar71xx: fix MAC address setup for TL-WDR4300 board
9bdd3d39ad ath79: fix MAC address setup for TP-Link TL-WDR3600/TL-WDR4300
08c850f046 ramips: fix USB LED for Belkin F9K1109v1
2c16044ccf mac80211: brcm: add support for BCM4359 SDIO chipset
c0f2905fa9 mac80211: brcm: backport 5.5 and 5.6 kernel patches

Compile-tested: ramips-mt7621
Run-tested: ramips-mt7621

[Matthias Schiffer: minor script improvements]

The docs previously only listed ath9k and ath10k based chipsets as fully
supported by Gluon, however we also support mt76.

3243523c46 ath79: migrate LED paths of TL-WDR4300 board
d0a71a89e1 malta: remove CONFIG_LEGACY_PTY from kernel config
9e6fb4463b sunxi: remove CONFIG_LEGACY_PTY from kernel config
4aebbaeac1 layerscape: remove CONFIG_LEGACY_PTY from kernel config
a2ac5b3a97 kirkwood: remove CONFIG_LEGACY_PTY from kernel config
a467f39e55 at91: disable legacy PTYs and virtual terminals
a77d4bc3a5 mpc85xx: remove CONFIG_LEGACY_PTY from kernel config
40a7e761a0 uml: remove CONFIG_LEGACY_PTY from kernel config
852ec97e1c oxnas: disable legacy PTYs and virtual terminals
1f1867dd9b odhcpd: optimize syslog priority values
03c93679b4 lantiq: remove redundant WiFi LED on FRITZ!Box 7320
795df80917 mpc85xx: add support for Enterasys WS-AP3710i
3959f11005 glibc: update to latest 2.27 commit (BZ #2503, BZ #2504)
a50c2190d3 glibc: backport fix for regexec buffer read overrun
929c6d733a glibc: update to latest 2.27 commit (BZ#23637)
e8e09c5893 glibc: update to latest 2.27 commit (BZ #24228, BZ #24744, BZ #24699)
6e24df296c ath79: add support for TP-Link TL-WDR4300 v1 (IL)
52c9f95178 ramips: allow JCG_MAXSIZE in kiB in Build/jcg-header
e33a123140 brcm47xx: add switch configuration for WNR3500L
d1d84da1c3 ramips: fix number of LAN Ports for Mikrotik RBM33G
fa700ed714 ramips: fix switch port order for TP-Link Archer C20i
0bb4733e67 ath10k-firmware: update Candela Tech firmware images
c3cc419cc6 kernel: bump 4.14 to 4.14.158

compile-tested: ath79-generic
run-tested: ath79-generic

Flash instructions in the OpenWRT Commit: https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=eae6cac6a30b95bef04d033ed8a303b7e35a078b

We only support v1, not v2 or v3.

At the December 2019 review day, the behavior for LAN only devices was
defined. Such devices will use each LAN port as WAN.

a regular Netgear WNDR3800
but identifies itself as wndr3800chmychart.

This reverts commits
- caf2dd03.
- 07ebac6a
- 55eff45f

I accidentally pushed these commits as I had them lying around on a
dirty checkout I did testing on.

d2d12346e8 mac80211: unify setup of iw htmode for mesh and adhoc
06bf1a9b67 ucert: update to latest git HEAD
d74526c1c5 OpenWrt v19.07.0-rc2: revert to branch defaults
628e996928 OpenWrt v19.07.0-rc2: adjust config defaults
db8345d8e4 generic ar8xxx: increase VLAN table for AR83x7
cde70954ef busybox: add glibc dependency for vi regex option
a4d798e8dd usign: Activate LTO compile option
1fc05c3115 swconfig: Activate LTO compile option
5cb845ebfe mtd: Activate LTO compile option
c38074de92 ramips: disable ZyXel Keenetic by default
432a349761 ramips: disable WR512-3GN 4MB variant by default
67aca5f0ae ramips: disable A5-V11 by default
eb836ea8e9 ar71xx: disable TP-Link TL-WA855RE by default
59ef47ae2c brcm47xx: disable Linksys E1000 v1 by default
7232d9247e ramips: disable TP-Link TL-WA750RE by default
531ab59804 ar71xx: disable TP-Link TL-WA850RE by default
634db7930a ramips: disable TP-Link TL-WR840N v5 by default
6a124efb99 ramips: disable Sitecom WL-351 by default
2607c02ed5 ramips: disable D-Link DIR-645 by default
02fc43b4b4 ramips: disable D-Link DIR-300 B5/B6/B7 by default
0686418338 ar71xx: disable Netgear WNR2000v4 by default
6af348f6a1 ar71xx: disable On Networks N150R by default
c65f09b641 ar71xx: disable TP-Link TL-WA850RE v2 by default
1793baee46 ar71xx: disable Netgear WNR612 v2 by default
4b759caf51 ramips: disable ASUS RT-N10+ B1 by default
953d9c384f kernel: bump 4.14 to 4.14.156
7581a7bebc config: kernel: fix typo in HFSPLUG_FS_POSIX_ACL

Compile-tested: mpc85xx-generic, ipq40xx-generic
Runtime-tested: ipq40xx-generic (GL-B1300)

OpenWrt:

03b412db2e3f luasrcdiet: add package (moved from luci-base package)
b98dcdc34273 cifsd-tools: update to git (2019-11-25)
a45dd8850244 adblock: update 3.8.12
88c37cb6fe2d transmission: Disable webseeding
e8438eb67ab8 transmission: Fix tracker issue with some firewalls
4a821376132a php7: Update to version 7.2.25
36358e7e382c php7: mark /etc/config/php7-fastcgi as conffile
3be4577ee916 php7-mod-xmlreader: add conditional dependency to php7-mod-dom (fixes #10201)
7aadc713003a php7: bump to 7.2.23
fc337287241f python-pyopenssl: Update to 19.1.0

Gluon:

208d9ccd14ba Revert "luasrcdiet: add package (moved from luci-base package)" and following

1859391e9ed2 uboot-envtools: ath79: add support for YunCore XD4200 and A782
45c9923edfeb ath79: add support for YunCore XD4200 and A782
83a18aefbdea ath79: add support for YunCore TFTP image generation
449433d13104 ath79: Add support for TP-Link Archer C60 v2
70233e3afe40 ath79: Add support for TP-Link Archer C60 v1
a2d9de21b841 base-files: config_generate: split macaddr with multiple ifaces
3a5e28bd266b ar71xx: ubnt-(xm,xw): add rssileds package
1cb763c559b8 ath79: add PoE passthrough switch for Ubiquiti Nanostation (XM/XW)
a0897f8a4663 uboot-envtools: ramips: add support for ALFA Network Quad-E4G
71469caa0ab4 ramips: add support for ALFA Network Quad-E4G
939dfe61ed8a uboot-envtools: ramips: add support for ALFA Network R36M-E4G
c515cd7c348c ramips: add support for ALFA Network R36M-E4G
7a62e909b286 ramips: support dual image feature on ALFA Network boards
ee71837e3857 ramips: refresh all subtargets kernel configs
3806899a5015 ramips: use upstream RAW_APPENDED_DTB instead of our OWRTDTB

gluon-mesh-babel: Fix packets leaving wrong interface