Fixes: c3435607 ("generic: increase RootFS size when GLUON_DEBUG is enabled")

Specification:
- MediaTek MT7620A (580 Mhz)
- 64 MB of RAM
- 8 MB of FLASH
- 2T2R 2.4 GHz and 1T1R 5 GHz
- 5x 10/100 Mbps Ethernet
- 2x external, non-detachable antennas
- UART (J1) header on PCB (115200 8n1)
- 8x LED (GPIO-controlled*), 2x button, power input switch
- 1 x USB 2.0 port

TP-Link TL-WR902AC v3 is a pocket-size dual-band (AC750) router
based on MediaTek MT7628N + MT7650E.

Specification:
- MediaTek MT7628N/N (580 Mhz)
- 64 MB of RAM
- 8 MB of FLASH
- 2T2R 2.4 GHz and 1T1R 5 GHz
- 1x 10/100 Mbps Ethernet

WiFi driver is stable now.

This increases the size of the root filesystem when GLUON_DEBUG is
enabled. Otherwise, the filesystem is too small.

Closes #1907

The Aruba Instant On AP11 is the Aruba AP-303 with a stripped-down
firmware. Add an alias for the device to remove confusion about the
different naming.

Remove the ath10k-ct-smallbuffers variant from the default
package-seleciton as it clashes with the QCA ath10k driver.

Flash instructions in the OpenWRT Commit: https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=eae6cac6a30b95bef04d033ed8a303b7e35a078b

a regular Netgear WNDR3800
but identifies itself as wndr3800chmychart.

The devolo WiFi pro 1200i lost it's ath10k package definitions while
rebasing, thus selecting the wrong package set.

Fix it by adding the correct firmware and driver.

This limits the line-length for the ATH10K package
definitions.

Fixes f49813b5

This removes the unused package definitions, as otherwise the Lua linter
will complain.

Hardware specification:
- SOC: Qualcomm QCA9563 @ 775MHz
- Flash: GigaDevice GD25Q64CSIG (8MiB)
- RAM: Zentel A3R1GE40JBF (128 MiB DDR2)
- Ethernet: Qualcomm QCA8337N: 4x 1Gbps LAN + 1x 1Gbps WAN
- Wireless:
  - 2.4GHz (bgn) QCA9563 integrated (3x3)
  - 5GHz (ac) Qualcomm QCA9886 (2x2)
- Button: 1x power, 1x reset, 1x wps
- LED: 6x LEDs: power, wlan2g, wlan5g, lan, wan, wps
- UART: There's no UART header on the board

As upstream now has model detection for the Ubiquiti UniFi AC LR, we
need to provide an autoupdater image matching the expected filename.

Closes #1834