Built, flashed and successully tested. This patch takes advantage of patch freifunk-gluon@e93173c which solved issue freifunk-gluon#226 by introducing "GluonProfileFactorySuffix". Packages are separated by a space, not a comma. The ALL0315N initially has a OpenWRT based firmware and there is no need for a factory image. The sysupgrade can be flashed instantly.

x86-generic is still marked as broken as fastd v16 doesn't work with uClibc on
x86. This will be fixed with fastd v17.

Signed-off-by: flokli <florian@darmstadt.freifunk.net>

Signed-off-by: flokli <florian@darmstadt.freifunk.net>

This still needs some work:

- there's no factory image causing `make images` to fail
- VoCore can not support BSS and IBSS at the same time
- multi-BSS mode (e.g. mesh + BSS) works if the macs only
  differ in the last 3 bits. Gluon expects to choose both MACs freely,
  though, so after flashing the image one should reset the wifi MACs.
  This is further complicated as VoCores have their MACs assigned
  without gaps making collisions likely.
- there are no buttons nor ethernet ports (without the dock, that is),
  so config-mode will not be possible as is

basic wifi meshing with neighbouring nodes
tested, with TL-WA750RE
 
client WLAN (if applicable)
works
 
client lan on LAN ports (if applicable)
n/a - only 1x Ethernet 

mesh-vpn on WAN port
works 

mesh-on-wan
Not tested

re-entering configmode by pressing the button for >3 seconds
works. 

entering failsafe mode
works 

whether the MAC address seen by Gluon is the one printed on the device
yes
 
Und folgende Kommandos:
tail /lib/gluon/core/sysconfig/*
brctl show
lua -e "print(require('platform_info').get_image_name())"

root@XXX:~# tail /lib/gluon/core/sysconfig/*
==> /lib/gluon/core/sysconfig/primary_mac <==
(macwieaufgerätaufgedruckt)
==> /lib/gluon/core/sysconfig/setup_ifname <==
eth0
==> /lib/gluon/core/sysconfig/wan_ifname <==
eth0


root@XXX:~# brctl show
bridge name	bridge id		STP enabled	interfaces
br-wan		7fff.(primarymac)	no		eth0
br-client		7fff.(primarymac)	no		bat0
							wlan0-1


root@XXXX:~# lua -e "print(require('platform_info').get_image_name())"
tp-link-tl-wa850re-v1

I have this little gadget. I've build gluon for this target and it seems that everything works well. Using this thing in the Stuttgart community (currently testing gluon).

mpc85xx and x86 are unchanged since rc3.