docs, README: Gluon v2016.1.4

README.md

@@ -16,7 +16,7 @@ our mailinglist to discuss it first.
 
 Please refrain from using the `master` branch for anything else but development purposes!
 Use the most recent release instead. You can list all relaseses by running `git branch -a`
-and switch to one by running `git checkout v2016.1.3 && make update`.
+and switch to one by running `git checkout v2016.1.4 && make update`.
 
 If you're using the autoupdater, do not autoupdate nodes with anything but releases.
 If you upgrade using random master commits the nodes *will break* eventually.

docs/index.rst

@@ -61,6 +61,7 @@ Releases
 .. toctree::
    :maxdepth: 1
 
+   releases/v2016.1.4
    releases/v2016.1.3
    releases/v2016.1.2
    releases/v2016.1.1

docs/releases/v2016.1.4.rst

+Gluon 2016.1.4
+==============
+
+Added hardware support
+~~~~~~~~~~~~~~~~~~~~~~
+
+ar71xx-generic
+^^^^^^^^^^^^^^
+
+* 8devices Carambola 2
+* Meraki MR12/MR62/MR16/MR66
+
+Bugfixes
+~~~~~~~~
+
+* Major update of all WLAN drivers
+
+  We've taken the unusual step of updating the WLAN drivers ("wireless-backports") to a much newer version, as
+  it was reported that the new version fixes unstable WLAN seen in many setups
+* Build fix: a race condition causing parallel builds to fail has been fixed
+* Build fix: the Gluon tree could get into a state in which all commands fail with "Too many levels of symbolic links"
+* Build fix: allow building Gluon on systems with certain versions of *dash* as */bin/sh*
+
+Known Issues
+~~~~~~~~~~~~
+
+* Default TX power on many Ubiquiti devices is too high, correct offsets are unknown (`#94 <https://github.com/freifunk-gluon/gluon/issues/94>`_)
+
+  Reducing the TX power in the Expert Mode is recommended.
+
+* The MAC address of the WAN interface is modified even when Mesh-on-WAN is disabled (`#496 <https://github.com/freifunk-gluon/gluon/issues/496>`_)
+
+  This may lead to issues in environments where a fixed MAC address is expected (like VMware when promicious mode is disallowed).
+
+* Inconsistent respondd API (`#522 <https://github.com/freifunk-gluon/gluon/issues/522>`_)
+
+  The current API is inconsistent and will be replaced eventually. The old API will still be supported for a while.
+
+* Unwritable flash on some Ubiquiti PicoStations (`#687 <https://github.com/freifunk-gluon/gluon/issues/687>`_)
+
+  Gluon v2016.1.1 added support for Ubiquiti AirMAX devices with AirOS 5.6.x without downgrading AirOS first before
+  flashing Gluon. It was discovered that on Ubiquiti PicoStations, this downgrade is still necessary, as the
+  flash is not correctly unlocked, leaving the device unable to leave Config Mode and making regular sysupgrades
+  impossible.
+
+  TFTP recovery can be used in this state to flash a new firmware.

docs/user/getting_started.rst

@@ -8,7 +8,7 @@ Gluon's releases are managed using `Git tags`_. If you are just getting
 started with Gluon we recommend to use the latest stable release of Gluon.
 
 Take a look at the `list of gluon releases`_ and notice the latest release,
-e.g. *v2016.1.3*. Always get Gluon using git and don't try to download it
+e.g. *v2016.1.4*. Always get Gluon using git and don't try to download it
 as a Zip archive as the archive will be missing version information.
 
 Please keep in mind that there is no "default Gluon" build; a site configuration
@@ -42,7 +42,7 @@ Building the images
 -------------------
 
 To build Gluon, first check out the repository. Replace *RELEASE* with the
-version you'd like to checkout, e.g. *v2016.1.3*.
+version you'd like to checkout, e.g. *v2016.1.4*.
 
 ::