From ea5d3f01f63d4e02713d3113e3fda046964c92ba Mon Sep 17 00:00:00 2001
From: Martin Weinelt <martin@darmstadt.freifunk.net>
Date: Sun, 23 Jun 2019 20:39:36 +0200
Subject: [PATCH] docs: Add v2018.2.2 release notes
---
docs/index.rst | 1 +
docs/releases/v2018.2.2.rst | 69 +++++++++++++++++++++++++++++++++++++
2 files changed, 70 insertions(+)
create mode 100644 docs/releases/v2018.2.2.rst
diff --git a/docs/index.rst b/docs/index.rst
index 0b20bfd07..cbf432286 100644
--- a/docs/index.rst
+++ b/docs/index.rst
@@ -71,6 +71,7 @@ Several Freifunk communities in Germany use Gluon as the foundation of their Fre
:caption: Releases
:maxdepth: 1
+ releases/v2018.2.2
releases/v2018.2.1
releases/v2018.2
releases/v2018.1.4
diff --git a/docs/releases/v2018.2.2.rst b/docs/releases/v2018.2.2.rst
new file mode 100644
index 000000000..dd02bee07
--- /dev/null
+++ b/docs/releases/v2018.2.2.rst
@@ -0,0 +1,69 @@
+Gluon 2018.2.2
+==============
+
+Removed hardware support
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+Support for the Onion Omega has been removed since the device does not
+have an ethernet port, and even with the ethernet shield connected the
+interface would not have been configured.
+
+Bugfixes
+~~~~~~~~
+
+* Fixes vulnerabilities that allowed for remote crashes and denial of service attacks through the Linux kernels
+ TCP selective acknowledgement implementation. (CVE-2019-11477, CVE-2019-11478 and CVE-2019-11479)
+
+* Fixes a bug in the image generation for the Netgear R6120 where the OverlayFS might not be created on boot as
+ the JFFS2 end-of-filesystem marker was omitted by the vendor firmware. This resulted in the router not being
+ able to save its configuration and seemingly "being stuck" in config-mode. (`#1722 <https://github.com/freifunk-gluon/gluon/pull/1722>`_)
+
+* Fixes oddities in the calculation of non-wireless clients published through respondd on batman-adv networks.
+ Previously both the kernel wifi layer and batman-adv were consulted, which led to issues because they use
+ different timeout values. (`#1676 <https://github.com/freifunk-gluon/gluon/pull/1676>`_)
+
+* Fixes doubled batman-adv management overhead, introduced with Gluon v2017.1. A timer in batman-adv was
+ wrongly started twice, resulting in each node emitting not one but two OGMs from the same originator per 5 seconds.
+ (`#1446 <https://github.com/freifunk-gluon/gluon/issues/1446>`_)
+
+* Fixes an issue, where services provided by a node (such as DNS resolver or status-page)
+ might become unavailable due to other misbehaving nodes on the same layer 2 segment.
+ (`#1659 <https://github.com/freifunk-gluon/gluon/issues/1659>`_)
+
+* Fixes traffic shaping not working correctly when using tunneldigger, as well as the migration between fastd
+ and tunneldigger (`#1736 <https://github.com/freifunk-gluon/gluon/issues/1736>`_)
+
+
+Other changes
+~~~~~~~~~~~~~
+
+* Linux kernel has been updated to 4.9.182 or 4.14.128, depending on the target
+
+
+Known issues
+~~~~~~~~~~~~
+
+* Default TX power on many Ubiquiti devices is too high, correct offsets are
+ unknown (`#94 <https://github.com/freifunk-gluon/gluon/issues/94>`_)
+
+ Reducing the TX power in the Advanced Settings is recommended.
+
+* The MAC address of the WAN interface is modified even when Mesh-on-WAN is
+ disabled (`#496 <https://github.com/freifunk-gluon/gluon/issues/496>`_)
+
+ This may lead to issues in environments where a fixed MAC address is expected
+ (like VMware when promiscuous mode is disallowed).
+
+* Inconsistent respondd API
+ (`#522 <https://github.com/freifunk-gluon/gluon/issues/522>`_)
+
+ The current API is inconsistent and will be replaced eventually. The old API
+ will still be supported for a while.
+
+* Frequent reboots due to out-of-memory or high load due to memory pressure on
+ weak hardware specially in larger meshes
+ (`#1243 <https://github.com/freifunk-gluon/gluon/issues/1243>`_)
+
+ Optimizations in Gluon 2018.1 have significantly improved memory usage.
+ There are still known bugs leading to unreasonably high load that we hope to
+ solve in future releases.
--
GitLab