1. 18 Mar, 2019 1 commit
  2. 15 Mar, 2019 2 commits
  3. 14 Mar, 2019 1 commit
  4. 13 Mar, 2019 3 commits
    • Martin Weinelt's avatar
      patches/openwrt: refresh... · c5c973b1
      Martin Weinelt authored
      patches/openwrt: refresh 0006-generic-vxlan-backport-support-for-VXLAN-over-link-local-IPv6-to-4.9.patch (#1663)
      
      c5c973b1
    • Martin Weinelt's avatar
      modules: update OpenWrt · 8890777d
      Martin Weinelt authored
      8de93ce745 mt76: update to the latest version
      85cb473f93 mac80211: add a fix to prevent unsafe queue wake calls during restart
      08db9397c9 mac80211: backport tx queue start/stop fix
      810ee3b84a kernel: bump 4.14 to 4.14.104
      5183df0dbf kernel: bump 4.9 to 4.9.161
      eea538204b kernel: fix refcnt leak in LED netdev trigger on interface rename
      f1803e3492 oxnas: add SoC restart driver for reboot
      1bfe1ce5c4 oxnas: cheery-pick DTS improvements from master
      9ee8c8daf4 kernel: bump 4.14 to 4.14.103
      e2ba7a4b47 kernel: bump 4.9 to 4.9.160
      
      Compile-tested: ramips-mt7621, ar71xx-generic
      8890777d
    • Sven Eckelmann's avatar
      ath10k/ath10k-ct: fix incorrect multicast/broadcast rate setting · ca69e9e3
      Sven Eckelmann authored
      If no mcast_rate is set for the wifi-iface then there is no rate_idx (0)
      set for the bss. This breaks for example 5GHz meshpoint interfaces because
      0 maps to a CCK rate (11Mbit/s).
      
      It must also be avoided that the ath10k-ct internal state for the rates is
      not synced with the mac80211 rates state. Otherwise, the user specified
      rate (e.g. a wifi-iface mcast_rate for a meshpoint interface) will only be
      set on startup. And a short while after that, ath10k-ct specific code in
      ath10k_check_apply_special_rates is missing a valid rate in its own
      structures and is then recalculating a new default rate. This default rate
      is in most situations not the requested rate.
      
      Fixes: a399b607 ("ath10k/ath10k-ct: support multicast and management rate control")
      ca69e9e3
  5. 25 Feb, 2019 12 commits
    • bobcanthelpyou's avatar
    • Martin Weinelt's avatar
      modules: update packages · 278108dd
      Martin Weinelt authored
      5de163d67 vallumd: bump to 0.1.4
      b8c2c2b1b mosquitto: update to 1.5.7
      8a2d56684 irssi: update to 1.2.0
      d0f5ae180 [18.06] python3: fix [CVE-2018-20406]
      dad217d34 shadowsocks-libev: flush ss rules on entry
      bbc2e68ed mosquitto: bump to 1.5.6
      9ffcfea19 mariadb: bump to 10.1.38
      09b794ecc stubby: update to version 0.2.4
      41c4f82f8 stubby: Remove iamperson347 from maintainer
      2cf2210d8 stubby: add Jonathan Underwood as co-maintainer (#7307)
      709a73604 stubby: add reload_config to documentation
      aa8380721 stubby: fix loading of config file
      6e2451dd0 stubby: add uci support to init file
      7a2b9df89 stubby: bump PKG_RELEASE
      304596d21 stubby: remove unnecessary core limit
      fd8505f76 stubby: add SPKI pin set for Cloudflare cert
      b77053d35 stubby: add Cloudflare 1.0.0.1 and ::1001 servers
      3f17c54f2 stubby: use EDNS client-subnet privacy by default
      935126632 stubby: fix config file definition
      d3b090a31 stubby: rearrange Makefile for clarity
      a3a73ef7b stubby: add missing dependency on ca-certificates
      ccf0c71ac getdns: update to version 1.5.0
      07e647645 getdns: Remove iamperson347 from maintainer
      ca7555e52 getdns: fix missing libbsd dependency
      cc8439566 acme: Fix loading credentials
      fb3dd71ef youtube-dl: update to version 2019.01.30.1
      4368783e9 python-idna: Add missing dependency on python(3)-codecs
      480e4d7e8 python/python3: Fix lib2to3 fixes search
      02dd97d14 libsndfile: update to 42132c543358cee9f7c3e9e9b15bb6c1063a608e
      34dec8190 python3: backport CVE-2018-14647 patch from upstream [18.06]
      3785db429 python: backport CVE-2018-14647 patches from upstream [18.06]
      8f41fa7f8 nut: Default to run as root but fix alt runas
      f7048b725 libsndfile: update to 8ddc442d539ca775d80cdbc7af17a718634a743f a/ulaw: fix multiple buffer overflows
      e3f32b75b python/python3: fix .dist-info missing for setuptools and pip
      
      Compile-tested: ramips-mt7621, ar71xx-generic
      278108dd
    • Martin Weinelt's avatar
      modules: update OpenWrt · f63f97aa
      Martin Weinelt authored
      1be6ff6dc0 kernel: bump 4.14 to 4.14.102
      e9cb40caa4 kernel: bump 4.9 to 4.9.159
      d32bbd7477 mac80211: brcmfmac: backport 5.0 & 5.1 important changes/fixes
      ce3a53c4f6 dnsmasq: prefer localuse over resolvfile guesswork
      87fb8aea87 dnsmasq: allow using dnsmasq as the sole resolver
      405840631c build: Accept BIN_DIR parameter for legacy-images
      bc3eb970ab ar71xx: Fix 5 GHz MAC address for Archer C60 v2
      20f1b7d3f5 kernel: bump 4.14 4.14.101
      d669be4654 kernel: bump 4.9 to 4.9.158
      
      Compile-tested: ramips-mt7621, ar71xx-generic
      Runtime-tested: ramips-mt7621 (D-Link DIR860L B1)
      f63f97aa
    • David Bauer's avatar
    • Martin Weinelt's avatar
      2398dcb8
    • David Bauer's avatar
      f8b15a6f
    • Martin Weinelt's avatar
      modules: update OpenWrt · 2f0d32ee
      Martin Weinelt authored
      62feabecd8 kernel: bump 4.14 to 4.14.99
      9fb3710a8b kernel: bump 4.9 to 4.9.156
      e5ace80759 mt76: update to the latest version
      fbb2186fbd kernel: bump 4.14 to 4.14.98
      72870cc108 kernel: bump 4.9 to 4.9.155
      19a6c4b2b3 mac80211: brcmfmac: fix a possible NULL pointer dereference
      d997712c71 ath9k: register GPIO chip for OF targets
      
      Compile-tested: ipq40xx, ramips-mt7621
      Runtime-tested: none
      2f0d32ee
    • David Bauer's avatar
      gluon-scheduled-domain-switch: add package (#1555) · ed3d890b
      David Bauer authored
      This package allows to automatically switch to another domain, either
      at a given point in time or after the node was offline long enough.
      ed3d890b
    • Sven Eckelmann's avatar
      ath10k/ath10k-ct: support multicast and management rate control · 39948de2
      Sven Eckelmann authored
      Drivers with software rate control can directly use the selected multicast
      rate for multicast/broadcast frames and the minimal basic rate for
      management frames. But drivers with offloaded rate control algorithms must
      be informed about such upper layer decisions to configure the
      hardware/firmware.
      
      A new BSS_CHANGED_MCAST_RATE is introduced in mac80211 to automatically
      inform all drivers. ath10k can detect this event and forward it via WMI to
      the driver. The already existing BSS_CHANGED_BASIC_RATES can be used to
      select the management rate.
      
      Without the WMI commands, a low rate (not necessarily one from the basic
      rates) is used for bcast/mcast/management frames. This means that the
      /etc/config/wireless settings basic_rate and mcast_rate would have no
      effect on the rates selected by this driver for the mentioned frames.
      39948de2
    • David Bauer's avatar
      ramips-mt76x8: add support for TP-Link Archer C50 v4 (#1641) · 49dff9ce
      David Bauer authored
      This backports the TP-Link Archer C50 v4.
      
      We are dropping the following upstream commits. They add support for the
      TP-Link recovery-flag which enabled the web-recovery. As they are not
      needed for the router to work, we drop them for now.
      
      28cd2ca base-files: sysupgrade: support additional mtd options
      1e06482 mtd: add logic for TP-Link ramips recovery magic
      49dff9ce
    • Martin Weinelt's avatar
      b5152481
    • David Bauer's avatar
      ramips-mt76x8: remove broken flag (#1608) · 9d8045f0
      David Bauer authored
      This commit removes the broken flag from all devices in the mt76x8
      subtarget.
      
      The stability of the mt76 driver for the mt7628 and mt7612 has greatly
      improved in the last half-year. It might be still behind ath9k and
      ath10k but it is suitable for daily use.
      
      This affects the following devices:
      
       - GL.iNet MT300N v2
       - TP-Link Archer C50 v3
       - TP-Link TL-WR841 v13
      9d8045f0
  6. 12 Feb, 2019 1 commit
  7. 04 Feb, 2019 12 commits
    • Martin Weinelt's avatar
    • Martin Weinelt's avatar
      modules: update OpenWrt · c58f780e
      Martin Weinelt authored
      9b14c7d3d1 netifd: handle hotplug event socket errors
      e33612484a brcm63xx: HG655b: fix the imagetag at dts
      ef17edae3d kernel: bump 4.14 to 4.14.97
      21762fe9d6 kernel: bump 4.9 to 4.9.154
      ab41836321 mt76: update to the latest version
      026f08a610 kernel: bump 4.14 to 4.14.96
      1f1f421af6 kernel: bump 4.9 to 4.9.153
      
      Compile-tested: ar71xx-generic, ramips-mt7621, x86-64
      c58f780e
    • Martin Weinelt's avatar
      modules: update OpenWrt · fcb08eaa
      Martin Weinelt authored
      13eeee7b2b mt76: update to the latest version
      ac1ce25671 OpenWrt v18.06.2: revert to branch defaults
      a02809f61b OpenWrt v18.06.2: adjust config defaults
      cddd7b4c77 base-files: config_get: prevent filename globbing
      e6162b2127 dnsmasq: backport missing braces fix
      d4178c8f47 build: fix umask detection bashism
      b98b55a64f build: fix STAGING_DIR cleaning for packages
      e6c2f3feb1 ar71xx: use correct wan mac address for the TP-Link Archer C7 v4
      2c7a1ccaea ar71xx: Add usb drivers in Archer C7 v4/v5 images
      39c3b5139f openssl: bump to 1.0.2q
      80ed6ebc56 dnsmasq: backport upstream static lease fix
      4f2199f528 wireguard: bump to 0.0.20190123
      8c105c62e4 wireguard: Update to snapshot 0.0.20181218
      1447924c95 mbedtls: update to 2.14.1 for 18.06
      e5a0b6cde0 uhttpd: disable concurrent requests by default
      11bfb39e39 kernel: bump 4.14 to 4.14.95
      dd5fa217dc kernel: bump 4.9 to 4.9.152
      91d3b87353 uboot-fritz4040: fix crash caused by interaction with gcc 7.1+
      
      Compile-tested: ar71xx-generic, mpc85xx-generic, ramips-mt7621
      Runtime-tested: ramips-mt7621 (D-Link DIR860L)
      fcb08eaa
    • Martin Weinelt's avatar
      modules: update routing · 1ae362f8
      Martin Weinelt authored
      ea345d1 Merge pull request #442 from ecsv/batadv-18.06
      0231308 batman-adv: Merge bugfixes from 2019.0
      
      Compile-tested: ar71xx-{tiny,generic}, ramips-mt7621, x86-64
      Runtime-tested: ar71xx-generic (TP-Link TL-WR1043NDv2)
      1ae362f8
    • Martin Weinelt's avatar
      modules: update OpenWrt · f845cd98
      Martin Weinelt authored
      6e16dd1234 mt76: update to the latest version
      76037756d0 kernel: bump 4.14 to 4.14.94
      455bfd1065 kernel: bump 4.9 to 4.9.151
      fafd7691e6 opkg: update to latest Git head
      e789bd2243 opkg: drop argument from check_signature in opkg.conf
      3603c2321d ramips: mt7621: fix 5GHz WiFi LED on ZBT WG3526
      7f98cd8d50 odhcpd: fix onlink IA check (FS#2060)
      abd0f7995e kmod-sched-cake: bump to latest cake
      
      Compile-tested: ar71xx-{tiny,generic}, ramips-mt7621, x86-64
      f845cd98
    • Martin Weinelt's avatar
      gluon-core: fix unifiac-{lite,pro} primary mac selection · 35b34e2d
      Martin Weinelt authored
      fixes #1629
      35b34e2d
    • Martin Weinelt's avatar
    • Malte Moeller's avatar
      change device identifier to match machine identifier · 657e2e47
      Malte Moeller authored
      this matches the output of
      lua -e 'print(require(platform_info).get_image_name())'
      
      This way the manifest file is accepted by the autoupdater
      657e2e47
    • Manu.WTF's avatar
      ramips-mt7620: add support for Nexx WT3020 (8M) · dc7ec574
      Manu.WTF authored
      dc7ec574
    • Martin Weinelt's avatar
      modules: update OpenWrt · 17d22a56
      Martin Weinelt authored
      939fa07b04 kernel: bump 4.14 to 4.14.93
      cae263227f kernel: bump 4.9 to 4.9.150
      f34ad1a8f0 mt76: update to the latest version
      d58c6aedb6 tools/firmware-utils: fix sysupgrade typo in mkdapimg2
      0cef35f096 tools/firmware-utils: fix sysupgrade typo in mkdapimg
      0d6eaa0ba5 octeon: fix typo in platform.sh
      069fda746e fstools: update to the latest master branch
      3b4e779e93 fstools: update to git HEAD
      d7275c0312 fstools: filter unknown action in mount.hotplug script
      e0daa62af6 fstools: Install mount.hotplug and 10-fstab.defaults as 600
      4c0e15fc16 base-files: install missing /etc/iproute2/ematch_map
      c3fef269d6 cns3xxx: use actual size reads for PCIe
      367ccf7a2d kernel: bump 4.14 to 4.14.91
      b9dcf2de5f kernel: bump 4.9 to 4.9.148
      a8cc06c537 mac80211: brcmfmac: backport firmware loading changes & fix memory bugs
      c5c20f510a odhcpd: noop to fix PKG_SOURCE_DATE
      62ddfaff32 odhcpd: filter routes based on prefix_filter
      8a9b0b95df apm821xx: switch MX60(W)'s recovery images to multi-image method
      afcdf099b7 kernel: fix f2fs on big endian machines
      016a71a18a odhcpd: backport prefix filter/NETEV_ADDR6LIST_CHANGE event fixes
      806b570a35 ath10k: update QCA4019 firmware
      baa00b2182 brcm2708-gpu-fw: update to git HEAD
      5af6b7976f bcm53xx: backport DTS changes queued for the 4.21
      dbbba84ed4 bcm53xx: rename dts backport patches changing their prefixes
      
      Compile-tested: ar71xx, ramips-{mt7621,mt76x8}, x86-64
      Runtime-tested: ramips-mt7621 (D-Link DIR860L)
      17d22a56
    • Martin Weinelt's avatar
    • David Bauer's avatar
      gluon-core: distribute dualband radios (#1606) · 4b236263
      David Bauer authored
      This commit distributes dualband radios evenly on 2.4 GHz and 5GHz with
      2.4 GHz being prioritised higher than 5 GHz. This means in case a device
      has only a single radio and this radio supports operation in both bands,
      it will be set to 2.4 GHz.
      Tested-by: default avatarMartin Weinelt <martin@darmstadt.freifunk.net>
      Signed-off-by: default avatarDavid Bauer <mail@david-bauer.net>
      4b236263
  8. 18 Jan, 2019 1 commit
  9. 03 Jan, 2019 1 commit
  10. 02 Jan, 2019 2 commits
  11. 29 Dec, 2018 4 commits