docs/releases/v2015.1.rst

@@ -19,7 +19,7 @@ ar71xx-generic
 
   - DIR-615 (C1)
 
-* GL-Inet
+* GL.iNet
 
   - 6408A (v1)
   - 6416A (v1)
@@ -170,16 +170,16 @@ Site changes
     for example::
 
       fastd_mesh_vpn = {
-          methods = {'salsa2012+umac'},
-          mtu = 1426,
-          groups = {
-              backbone = {
-                  limit = 2,
-                  peers = {
-                      -- ...
-                  }
-              }
+        methods = {'salsa2012+umac'},
+        mtu = 1426,
+        groups = {
+          backbone = {
+            limit = 2,
+            peers = {
+              -- ...
+            }
           }
+        }
       }
 
   - ``config_mode``: The config mode messages aren't configured in ``site.conf`` anymore. Instead, they are
@@ -190,11 +190,11 @@ Site changes
     in the site i18n files. The ``site.conf`` section becomes::
 
       roles = {
-          default = 'foo',
-          list = {
-              'foo',
-              'bar',
-          }
+        default = 'foo',
+        list = {
+          'foo',
+          'bar',
+        }
       }
 
     The display string use i18n message IDs like ``gluon-luci-node-role:role:foo`` and ``gluon-luci-node-role:role:bar``.

docs/releases/v2016.1.5.rst

@@ -9,21 +9,21 @@ ar71xx-generic
 
 * OpenMesh
 
- - MR600 (v1, v2)
- - MR900 (v1, v2)
- - OM2P (v1, v2)
- - OM2P-HS (v1, v2)
- - OM2P-LC
- - OM5P
- - OM5P-AN
+  - MR600 (v1, v2)
+  - MR900 (v1, v2)
+  - OM2P (v1, v2)
+  - OM2P-HS (v1, v2)
+  - OM2P-LC
+  - OM5P
+  - OM5P-AN
 
 * Ubiquiti
 
- - Rocket M XW
+  - Rocket M XW
 
 * TP-LINK
 
- - TL-WR841N/ND v11
+  - TL-WR841N/ND v11
 
 Bugfixes
 ~~~~~~~~

docs/releases/v2016.2.rst

@@ -46,12 +46,12 @@ ar71xx-generic
 brcm2708-bcm2708
 ^^^^^^^^^^^^^^^^
 
-* RaspberryPi 1
+* Raspberry Pi 1
 
 brcm2708-bcm2709
 ^^^^^^^^^^^^^^^^
 
-* RaspberryPi 2
+* Raspberry Pi 2
 
 New features
 ~~~~~~~~~~~~

docs/releases/v2017.1.rst

@@ -88,6 +88,8 @@ New features
 * Add support for making nodes a DNS cache for clients
   (`#1000 <https://github.com/freifunk-gluon/gluon/pull/1000>`_)
 
+  See also: :doc:`../features/dns-cache`
+
 * Add L2TP via tunneldigger as an alternative VPN system
   (`#978 <https://github.com/freifunk-gluon/gluon/pull/978>`_)
 

docs/releases/v2018.1.2.rst

@@ -28,7 +28,7 @@ Bugfixes
   As the path to both config mode and status page were changed between versions
   users could be affected by a redirect to a no more valid URL. 
 
-* batman-adv has received two bugfixes, which were `backported <https://github.com/openwrt-routing/packages/commit/7bf62cc8b556b5046f9bbd37687376fe9ea175bb>`_ from v2018.4
+* batman-adv has received two bugfixes, which were `backported <https://github.com/openwrt/routing/commit/7bf62cc8b556b5046f9bbd37687376fe9ea175bb>`_ from v2018.4
 
 Other changes
 ~~~~~~~~~~~~~

docs/releases/v2018.2.1.rst

@@ -21,7 +21,7 @@ ramips-mt7620
 ramips-mt76x8
 ^^^^^^^^^^^^^
 
-* Gl.iNet
+* GL.iNet
 
   - MT300N (v2) [#noibss]_
 

docs/releases/v2018.2.4.rst

@@ -12,7 +12,7 @@ Bugfixes
 * Fixes device alias for Ubiquiti UniFi AC LR. (`#1834 <https://github.com/freifunk-gluon/gluon/issues/1834>`_)
   Autoupdates on this model were impossible before, since we were missing the proper device alias.
 
-* Add correct ath10k firmware package for OCEDO Koala. (`#1838 <https://github.com/freifunk-gluon/gluon/pull/1838>`_)
+* Add correct ath10k firmware package for Ocedo Koala. (`#1838 <https://github.com/freifunk-gluon/gluon/pull/1838>`_)
 
 * Fixes various batman-adv bugs with backports from 2019.4 and 2019.5 by updating the openwrt-routing packages feed
 
@@ -20,7 +20,7 @@ Other changes
 ~~~~~~~~~~~~~
 
 * Linux kernel has been updated to either
-  
+
   - 4.9.207 (ar71xx, brcm2708, mpc85xx) or
   - 4.14.160 (ipq40xx, ipq806x, mvebu, ramips, sunxi, x86).
 

docs/releases/v2018.2.rst

@@ -18,7 +18,7 @@ ar71xx-generic
 
   - Fritz!WLAN Repeater 450E
 
-* OCEDO
+* Ocedo
 
   - Koala
 

docs/releases/v2019.1.1.rst

@@ -7,7 +7,7 @@ Bugfixes
 * Fixes device alias for Ubiquiti UniFi AC LR. (`#1834 <https://github.com/freifunk-gluon/gluon/issues/1834>`_)
   Autoupdates on this model were impossible before, since we were missing the proper device alias.
 
-* Add correct ath10k firmware package for OCEDO Koala. (`#1838 <https://github.com/freifunk-gluon/gluon/pull/1838>`_)
+* Add correct ath10k firmware package for Ocedo Koala. (`#1838 <https://github.com/freifunk-gluon/gluon/pull/1838>`_)
 
 * Fixes various batman-adv bugs with backports from 2019.4 and 2019.5 by updating the openwrt-routing packages feed.
 
@@ -30,13 +30,15 @@ Known issues
 
 * The integration of the BATMAN_V routing algorithm is incomplete.
 
-   - | Mesh neighbors don't appear on the status page. (`#1726 <https://github.com/freifunk-gluon/gluon/issues/1726>`_)
-     | Many tools have the BATMAN_IV metric hardcoded, these need to be updated to account for the new throughput
-     | metric.
+  - Mesh neighbors don't appear on the status page. (`#1726 <https://github.com/freifunk-gluon/gluon/issues/1726>`_)
 
-   - | Throughput values are not correctly acquired for different interface types.
-     | (`#1728 <https://github.com/freifunk-gluon/gluon/issues/1728>`_)
-     | This affects virtual interface types like bridges and VXLAN.
+    Many tools have the BATMAN_IV metric hardcoded, these need to be updated to account for the new throughput
+    metric.
+
+  - Throughput values are not correctly acquired for different interface types.
+    (`#1728 <https://github.com/freifunk-gluon/gluon/issues/1728>`_)
+
+    This affects virtual interface types like bridges and VXLAN.
 
 * Default TX power on many Ubiquiti devices is too high, correct offsets are unknown
   (`#94 <https://github.com/freifunk-gluon/gluon/issues/94>`_)

docs/releases/v2019.1.2.rst

@@ -26,13 +26,15 @@ Known issues
 
 * The integration of the BATMAN_V routing algorithm is incomplete.
 
-   - | Mesh neighbors don't appear on the status page. (`#1726 <https://github.com/freifunk-gluon/gluon/issues/1726>`_)
-     | Many tools have the BATMAN_IV metric hardcoded, these need to be updated to account for the new throughput
-     | metric.
+  - Mesh neighbors don't appear on the status page. (`#1726 <https://github.com/freifunk-gluon/gluon/issues/1726>`_)
 
-   - | Throughput values are not correctly acquired for different interface types.
-     | (`#1728 <https://github.com/freifunk-gluon/gluon/issues/1728>`_)
-     | This affects virtual interface types like bridges and VXLAN.
+    Many tools have the BATMAN_IV metric hardcoded, these need to be updated to account for the new throughput
+    metric.
+
+  - Throughput values are not correctly acquired for different interface types.
+    (`#1728 <https://github.com/freifunk-gluon/gluon/issues/1728>`_)
+
+    This affects virtual interface types like bridges and VXLAN.
 
 * Default TX power on many Ubiquiti devices is too high, correct offsets are unknown
   (`#94 <https://github.com/freifunk-gluon/gluon/issues/94>`_)

docs/releases/v2019.1.3.rst

+Gluon 2019.1.3
+==============
+
+Bugfixes
+--------
+
+- Fixes a bug in the tunneldigger watchdog where the watchdog would incorrectly find itself while looking up the running tunneldigger process. It then went on and assumed a PID mismatch between the tunneldigger service and its PID file and therefore caused an unnecessary restart of the tunnel. (`#1952 <https://github.com/freifunk-gluon/gluon/issues/1952>`_)
+
+- Fixes an oversight in the firewalling of the respondd service where queries from prefix listed in ``extra_prefixes6`` would be dropped. (`#1941 <https://github.com/freifunk-gluon/gluon/issues/1941>`_)
+
+- Fixes a bug in ``gluon-web`` where forms would not correctly update their field visibility on reset. This affected, for example, the private wifi page in the config mode. (`#1970 <https://github.com/freifunk-gluon/gluon/pull/1970>`_)
+
+- Fixes RX buffer sizing in the ath10k driver to allow for frames larger than 1528 Bytes. (`#1992 <https://github.com/freifunk-gluon/gluon/pull/1992>`_)
+
+- Fixed handling of mesh interfaces together with outdoor mode, site.conf defaults and config mode (`#2049 <https://github.com/freifunk-gluon/gluon/pull/2049>`_) (`#2054 <https://github.com/freifunk-gluon/gluon/pull/2054>`_)
+
+- Fixes a bug with perl when building Gluon v2019.1.x with GCC10
+
+- Fixes a buffer leak in fastd when receiving invalid packets
+
+Other Changes
+-------------
+
+- Linux kernel has been updated to either
+
+  - 4.9.237 (ar71xx, brcm2708, mpc85xx) or
+  - 4.14.199 (ipq40xx, ipq806x, mvebu, ramips, sunxi, x86).
+
+- Backports of batman-adv bugfixes
+
+Known issues
+------------
+
+* Out of memory situations with high client count on ath9k.
+  (`#1768 <https://github.com/freifunk-gluon/gluon/issues/1768>`_)
+
+* The integration of the BATMAN_V routing algorithm is incomplete.
+
+  - Mesh neighbors don't appear on the status page. (`#1726 <https://github.com/freifunk-gluon/gluon/issues/1726>`_)
+
+    Many tools have the BATMAN_IV metric hardcoded, these need to be updated to account for the new throughput
+    metric.
+
+  - Throughput values are not correctly acquired for different interface types.
+    (`#1728 <https://github.com/freifunk-gluon/gluon/issues/1728>`_)
+
+    This affects virtual interface types like bridges and VXLAN.
+
+* Default TX power on many Ubiquiti devices is too high, correct offsets are unknown
+  (`#94 <https://github.com/freifunk-gluon/gluon/issues/94>`_)
+
+  Reducing the TX power in the Advanced Settings is recommended.
+
+* The MAC address of the WAN interface is modified even when Mesh-on-WAN is disabled
+  (`#496 <https://github.com/freifunk-gluon/gluon/issues/496>`_)
+
+  This may lead to issues in environments where a fixed MAC address is expected (like VMware when promiscuous mode is
+  disallowed).
+
+* Inconsistent respondd API (`#522 <https://github.com/freifunk-gluon/gluon/issues/522>`_)
+
+  The current API is inconsistent and will be replaced eventually. The old API will still be supported for a while.
+
+* Frequent reboots due to out-of-memory or high load due to memory pressure on weak hardware especially in larger
+  meshes (`#1243 <https://github.com/freifunk-gluon/gluon/issues/1243>`_)
+
+  Optimizations in Gluon 2018.1 have significantly improved memory usage.
+  There are still known bugs leading to unreasonably high load that we hope to
+  solve in future releases.
+

docs/releases/v2020.1.1.rst

@@ -10,7 +10,7 @@ Bugfixes
 - Fixed non-working LEDs on TP-Link Archer C5 v1 and Archer C7 v2 after an upgrade to Gluon 2020.1.
 
 - Fixed an issue which leads to AVM FRITZ!WLAN Repeater 450E devices being stuck in failsafe mode
-  ater an upgrade to Gluon 2020.1.
+  after an upgrade to Gluon 2020.1.
 
 Other changes
 -------------
@@ -25,13 +25,15 @@ Known issues
 
 - The integration of the BATMAN_V routing algorithm is incomplete.
 
-   - | Mesh neighbors don't appear on the status page. (`#1726 <https://github.com/freifunk-gluon/gluon/issues/1726>`_)
-     | Many tools have the BATMAN_IV metric hardcoded, these need to be updated to account for the new throughput
-     | metric.
+  - Mesh neighbors don't appear on the status page. (`#1726 <https://github.com/freifunk-gluon/gluon/issues/1726>`_)
 
-   - | Throughput values are not correctly acquired for different interface types.
-     | (`#1728 <https://github.com/freifunk-gluon/gluon/issues/1728>`_)
-     | This affects virtual interface types like bridges and VXLAN.
+    Many tools have the BATMAN_IV metric hardcoded, these need to be updated to account for the new throughput
+    metric.
+
+  - Throughput values are not correctly acquired for different interface types.
+    (`#1728 <https://github.com/freifunk-gluon/gluon/issues/1728>`_)
+
+    This affects virtual interface types like bridges and VXLAN.
 
 - Default TX power on many Ubiquiti devices is too high, correct offsets are unknown
   (`#94 <https://github.com/freifunk-gluon/gluon/issues/94>`_)