docs/releases/v2014.4.rst

@@ -146,7 +146,7 @@ Ignored tx-power offset on Ubiquiti AirMax devices
 
 https://github.com/freifunk-gluon/gluon/issues/94
 
-There is still no OpenWRT support for determining the transmission
+There is still no OpenWrt support for determining the transmission
 power offsets on Ubiquiti AirMax devices (Bullet M2, Picostation
 M2, Nanostation (loco) M2, ...). Use Gluon with caution on these
 devices! Manual adjustment may be required.

docs/releases/v2015.1.rst

@@ -19,7 +19,7 @@ ar71xx-generic
 
   - DIR-615 (C1)
 
-* GL-Inet
+* GL.iNet
 
   - 6408A (v1)
   - 6416A (v1)
@@ -170,16 +170,16 @@ Site changes
     for example::
 
       fastd_mesh_vpn = {
-          methods = {'salsa2012+umac'},
-          mtu = 1426,
-          groups = {
-              backbone = {
-                  limit = 2,
-                  peers = {
-                      -- ...
-                  }
-              }
+        methods = {'salsa2012+umac'},
+        mtu = 1426,
+        groups = {
+          backbone = {
+            limit = 2,
+            peers = {
+              -- ...
+            }
           }
+        }
       }
 
   - ``config_mode``: The config mode messages aren't configured in ``site.conf`` anymore. Instead, they are
@@ -190,11 +190,11 @@ Site changes
     in the site i18n files. The ``site.conf`` section becomes::
 
       roles = {
-          default = 'foo',
-          list = {
-              'foo',
-              'bar',
-          }
+        default = 'foo',
+        list = {
+          'foo',
+          'bar',
+        }
       }
 
     The display string use i18n message IDs like ``gluon-luci-node-role:role:foo`` and ``gluon-luci-node-role:role:bar``.

docs/releases/v2016.1.5.rst

@@ -9,21 +9,21 @@ ar71xx-generic
 
 * OpenMesh
 
- - MR600 (v1, v2)
- - MR900 (v1, v2)
- - OM2P (v1, v2)
- - OM2P-HS (v1, v2)
- - OM2P-LC
- - OM5P
- - OM5P-AN
+  - MR600 (v1, v2)
+  - MR900 (v1, v2)
+  - OM2P (v1, v2)
+  - OM2P-HS (v1, v2)
+  - OM2P-LC
+  - OM5P
+  - OM5P-AN
 
 * Ubiquiti
 
- - Rocket M XW
+  - Rocket M XW
 
 * TP-LINK
 
- - TL-WR841N/ND v11
+  - TL-WR841N/ND v11
 
 Bugfixes
 ~~~~~~~~

docs/releases/v2016.2.rst

@@ -46,12 +46,12 @@ ar71xx-generic
 brcm2708-bcm2708
 ^^^^^^^^^^^^^^^^
 
-* RaspberryPi 1
+* Raspberry Pi 1
 
 brcm2708-bcm2709
 ^^^^^^^^^^^^^^^^
 
-* RaspberryPi 2
+* Raspberry Pi 2
 
 New features
 ~~~~~~~~~~~~

docs/releases/v2017.1.rst

@@ -88,6 +88,8 @@ New features
 * Add support for making nodes a DNS cache for clients
   (`#1000 <https://github.com/freifunk-gluon/gluon/pull/1000>`_)
 
+  See also: :doc:`../features/dns-cache`
+
 * Add L2TP via tunneldigger as an alternative VPN system
   (`#978 <https://github.com/freifunk-gluon/gluon/pull/978>`_)
 

docs/releases/v2018.1.2.rst

@@ -28,7 +28,7 @@ Bugfixes
   As the path to both config mode and status page were changed between versions
   users could be affected by a redirect to a no more valid URL. 
 
-* batman-adv has received two bugfixes, which were `backported <https://github.com/openwrt-routing/packages/commit/7bf62cc8b556b5046f9bbd37687376fe9ea175bb>`_ from v2018.4
+* batman-adv has received two bugfixes, which were `backported <https://github.com/openwrt/routing/commit/7bf62cc8b556b5046f9bbd37687376fe9ea175bb>`_ from v2018.4
 
 Other changes
 ~~~~~~~~~~~~~

docs/releases/v2018.2.1.rst

@@ -21,7 +21,7 @@ ramips-mt7620
 ramips-mt76x8
 ^^^^^^^^^^^^^
 
-* Gl.iNet
+* GL.iNet
 
   - MT300N (v2) [#noibss]_
 

docs/releases/v2018.2.4.rst

+Gluon 2018.2.4
+==============
+
+End of life
+~~~~~~~~~~~~~~
+
+This will be the final release of the v2018.2.x series. Updating to the v2019.1.x release series is the recommended course of action, which should be fairly easy.
+
+Bugfixes
+~~~~~~~~
+
+* Fixes device alias for Ubiquiti UniFi AC LR. (`#1834 <https://github.com/freifunk-gluon/gluon/issues/1834>`_)
+  Autoupdates on this model were impossible before, since we were missing the proper device alias.
+
+* Add correct ath10k firmware package for Ocedo Koala. (`#1838 <https://github.com/freifunk-gluon/gluon/pull/1838>`_)
+
+* Fixes various batman-adv bugs with backports from 2019.4 and 2019.5 by updating the openwrt-routing packages feed
+
+Other changes
+~~~~~~~~~~~~~
+
+* Linux kernel has been updated to either
+
+  - 4.9.207 (ar71xx, brcm2708, mpc85xx) or
+  - 4.14.160 (ipq40xx, ipq806x, mvebu, ramips, sunxi, x86).
+
+Known issues
+~~~~~~~~~~~~
+
+* Default TX power on many Ubiquiti devices is too high, correct offsets are
+  unknown (`#94 <https://github.com/freifunk-gluon/gluon/issues/94>`_)
+
+  Reducing the TX power in the Advanced Settings is recommended.
+
+* The MAC address of the WAN interface is modified even when Mesh-on-WAN is
+  disabled (`#496 <https://github.com/freifunk-gluon/gluon/issues/496>`_)
+
+  This may lead to issues in environments where a fixed MAC address is expected
+  (like VMware when promiscuous mode is disallowed).
+
+* Inconsistent respondd API
+  (`#522 <https://github.com/freifunk-gluon/gluon/issues/522>`_)
+
+  The current API is inconsistent and will be replaced eventually. The old API
+  will still be supported for a while.
+
+* Frequent reboots due to out-of-memory or high load due to memory pressure on
+  weak hardware especially in larger meshes
+  (`#1243 <https://github.com/freifunk-gluon/gluon/issues/1243>`_)
+
+  Optimizations in Gluon 2018.1 have significantly improved memory usage.
+  There are still known bugs leading to unreasonably high load that we hope to
+  solve in future releases.

docs/releases/v2018.2.rst

@@ -18,7 +18,7 @@ ar71xx-generic
 
   - Fritz!WLAN Repeater 450E
 
-* OCEDO
+* Ocedo
 
   - Koala