docs/dev/web/view.rst

+Views
+=====
+
+The template parser reads views from the ``view`` subdirectory of a
+gluon-web application (``/lib/gluon/config-mode/view`` for the config mode,
+``lib/gluon/status-page/view`` for the status page).
+Writing own views should usually be avoided in favour of using :doc:`model`
+with their predefined views.
+
+Views are partial HTML pages, with additional template tags that allow
+to embed Lua code and translation strings. The following tags are defined:
+
+  - ``<%`` ... ``%>`` evaluates the enclosed Lua expression.
+  - ``<%|`` ... ``%>`` evaluates the enclosed Lua expression and prints its value.
+  - ``<%=`` ... ``%>`` evaluates the enclosed Lua expression and prints its value
+    *without escaping HTML entities*. This is useful when the value contains HTML code.
+  - ``<%+`` ... ``%>`` includes another template.
+  - ``<%:`` ... ``%>`` translates the enclosed string using the loaded i18n catalog.
+  - ``<%_`` ... ``%>`` translates the enclosed string *without escaping HTML entities*
+    in the translation. This only makes sense when the i18n catalog contains HTML code.
+  - ``<%#`` ... ``%>`` is a comment.
+
+All of these also come in the whitespace-stripping variants ``<%-`` and ``-%>`` that
+remove all whitespace before or after the tag.
+
+Complex combinations of HTML and Lua code are possible, for example:
+
+.. code-block:: text
+
+  <div>
+    <% if foo then %>
+      Content
+    <% end %>
+  </div>
+
+
+Variables and functions
+-----------------------
+
+Many call sites define additional variables (for example, model templates can
+access the model as *self* and a unique element ID as *id*), but the following
+variables and functions should always be available for the embedded Lua code:
+
+  - *renderer*: :ref:`web-controller-template-renderer`
+  - *http*: :ref:`web-controller-http`
+  - *request*: Table containing the path components of the current page
+  - *url* (*path*): returns the URL for the given path, which is passed as a table of path components.
+  - *attr* (*key*, *value*): Returns a string of the form ``key="value"``
+    (with a leading space character before the key).
+
+    *value* is converted to a string (tables are serialized as JSON) and HTML entities
+    are escaped. Returns an empty string when *value* is *nil* or *false*.
+  - *include* (*template*): Includes another template.
+  - *node* (*path*, ...): Returns the controller node for the given page (passed as
+    one argument per path component).
+
+    Use ``node(unpack(request))`` to get the node for the current page.
+  - *pcdata* (*str*): Escapes HTML entities in the passed string.
+  - *urlencode* (*str*): Escapes the passed string for use in an URL.
+  - *translate*, *_translate*, *translatef* and *i18n*: see :doc:`i18n`

docs/features/configmode.rst

@@ -14,10 +14,13 @@ Activating Config Mode
 ----------------------
 
 Config Mode is automatically entered at the first boot. You can re-enter
-Config Mode by pressing and holding the RESET/WPS button for about three
-seconds. The device should reboot (all LEDs will turn of briefly) and 
+Config Mode by pressing and holding the RESET/WPS/DECT button for about three
+seconds. The device should reboot (all LEDs will turn off briefly) and
 Config Mode will be available.
 
+If you have access to the console of the node, there is the
+``gluon-enter-setup-mode`` command, which reboots a node into Config Mode.
+
 
 Port Configuration
 ------------------

docs/features/private-wlan.rst

 Private WLAN
 ============
 
-It is possible to set up a private WLAN that bridges the WAN port and is seperated from the mesh network.
-Please note that you should not enable ``mesh_on_wan`` simultaneously.
+It is possible to set up a private WLAN that bridges the uplink port and is separated from the mesh network.
+Please note that you should not enable Wired Mesh on the uplink port at the same time.
 
-The private WLAN can be enabled through the config mode if the package ``gluon-luci-private-wifi`` is installed.
+The private WLAN is encrypted using WPA2 by default. On devices with enough flash and a supported radio,
+WPA3 or WPA2/WPA3 mixed-mode can be used instead of WPA2. For this to work, the ``wireless-encryption-wpa3``
+feature has to be enabled as a feature.
+
+It is recommended to enable IEEE 802.11w management frame protection for WPA2/WPA3 networks, however this
+can lead to connectivity problems for older clients. In this case, management frame protection can be
+made optional or completely disabled in the advanced settings tab.
+
+The private WLAN can be enabled through the config mode if the package ``gluon-web-private-wifi`` is installed.
 You may also enable a private WLAN using the command line::
 
-  uci set wireless.wan_radio0=wifi-iface
-  uci set wireless.wan_radio0.device=radio0
-  uci set wireless.wan_radio0.network=wan
-  uci set wireless.wan_radio0.mode=ap
-  uci set wireless.wan_radio0.encryption=psk2
-  uci set wireless.wan_radio0.ssid="$SSID"
-  uci set wireless.wan_radio0.key="$KEY"
-  uci set wireless.wan_radio0.disabled=0
+  RID=0
+  SSID="privateWLANname"
+  KEY="yoursecret1337password"
+
+  uci set wireless.wan_radio$RID=wifi-iface
+  uci set wireless.wan_radio$RID.device=radio$RID
+  uci set wireless.wan_radio$RID.network=wan
+  uci set wireless.wan_radio$RID.mode=ap
+  uci set wireless.wan_radio$RID.encryption=psk2
+  uci set wireless.wan_radio$RID.ssid="$SSID"
+  uci set wireless.wan_radio$RID.key="$KEY"
+  uci set wireless.wan_radio$RID.disabled=0
+  uci set wireless.wan_radio$RID.macaddr=$(lua -e "print(require('gluon.util').generate_mac(3+4*$RID))")
   uci commit
   wifi
 

docs/multidomain-site-example/i18n

+../site-example/i18n/
\ No newline at end of file