From 66f30e98a3e8209053833158dc9a1d7df3a73526 Mon Sep 17 00:00:00 2001
From: Martin Weinelt <martin@darmstadt.freifunk.net>
Date: Thu, 14 Mar 2019 15:35:40 +0100
Subject: [PATCH] docs: add v2018.2.1 release notes
---
docs/index.rst | 1 +
docs/releases/v2018.2.1.rst | 128 ++++++++++++++++++++++++++++++++++++
2 files changed, 129 insertions(+)
create mode 100644 docs/releases/v2018.2.1.rst
diff --git a/docs/index.rst b/docs/index.rst
index 73d39e4bf..c5767ae58 100644
--- a/docs/index.rst
+++ b/docs/index.rst
@@ -71,6 +71,7 @@ Several Freifunk communities in Germany use Gluon as the foundation of their Fre
:caption: Releases
:maxdepth: 1
+ releases/v2018.2.1
releases/v2018.2
releases/v2018.1.4
releases/v2018.1.3
diff --git a/docs/releases/v2018.2.1.rst b/docs/releases/v2018.2.1.rst
new file mode 100644
index 000000000..aa291b8a6
--- /dev/null
+++ b/docs/releases/v2018.2.1.rst
@@ -0,0 +1,128 @@
+Gluon 2018.2.1
+==============
+
+Added hardware support
+~~~~~~~~~~~~~~~~~~~~~~
+
+ar71xx-generic
+^^^^^^^^^^^^^^
+
+* AVM
+
+ - Fritz!WLAN Repeater 300E
+
+ramips-mt7620
+^^^^^^^^^^^^^
+
+* Nexx
+
+ - WT3020AD/F/H [#noibss]_
+
+ramips-mt76x8
+^^^^^^^^^^^^^
+
+* Gl.iNet
+
+ - MT300N (v2) [#noibss]_
+
+* Netgear
+
+ - R6120 [#noibss]_
+
+* TP-Link
+
+ - Archer C50 (v3, v4) [#noibss]_
+ - TL-WR841N (v13) [#noibss]_
+
+Bugfixes
+~~~~~~~~
+
+* Fixes a bug in the batman-adv respondd module that caused duplicate
+ IPv6 addresses in nodeinfo replies (`#1615 <https://github.com/freifunk-gluon/gluon/issues/1615>`_)
+
+ This was visible on the status page and several map implementations.
+ The new implementation uses netlink instead of parsing `/proc/net/if_inet6`.
+
+* Fixes a localization issue in gluon-config-mode-geo-location which
+ resulted in a partial translation of the wizard's location section
+ text. (`#1611 <https://github.com/freifunk-gluon/gluon/issues/1611>`_)
+
+* Fixes the display of the improved memory usage estimation in gluon-status-page
+
+ This change was actually already merged in time for v2018.2 but the
+ JavaScript was not rebuilt.
+
+* Fixes automatic updates for several devices by adding and updating
+ the autoupdater image names
+
+ This affects the following devices:
+
+ * GL.iNet GL-AR150,
+ * GL.iNet GL-AR300M
+ * GL.iNet GL-AR750
+ * Raspberry Pi Model B+ Rev 1.2
+
+* Fixes the primary MAC address selection for Unifi AC
+ Lite/Mesh/Pro/Mesh Pro (`#1629 <https://github.com/freifunk-gluon/gluon/issues/1629>`_)
+
+* Fixes low data rate selection for multicast and management frames on
+ ath10k and ath10k-ct (`#1644 <https://github.com/freifunk-gluon/gluon/pull/1644>`_)
+
+ A patchset has been backported that notifies these drivers of requested data rate changes
+
+* Fixes the data rate selection in ath10k and ath10k-ct when no
+ `mcast_rate` is configured (`#1657 <https://github.com/freifunk-gluon/gluon/pull/1657>`_)
+
+ Previously a missing mcast_rate could result in broken 5 GHz connectivity
+
+New features
+~~~~~~~~~~~~
+
+Scheduled domain switch
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Gluon has support for multiple domains since its v2018.1 release.
+The scheduled domain switch allows for reliable migrations between
+domains at a preconfigured time.
+This can be useful for communities that, among other things, plan to
+
+ * migrate between IBSS and 802.11s
+ * activate VXLAN encapsulation on wired mesh links
+
+Improved frequency band distribution of dual-band radios
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+A new algorithm that improves the distribution of dual-band radios was
+added. They will now be evenly distributed between the 2.4 and 5 GHz
+band, with a preference towards 2.4 GHz.
+
+If a device has only a single dual-band radio, like the AVM FRITZ!WLAN
+Repeater 300E, it will be configured for 2.4 GHz.
+
+Known issues
+~~~~~~~~~~~~
+
+* Default TX power on many Ubiquiti devices is too high, correct offsets are
+ unknown (`#94 <https://github.com/freifunk-gluon/gluon/issues/94>`_)
+
+ Reducing the TX power in the Advanced Settings is recommended.
+
+* The MAC address of the WAN interface is modified even when Mesh-on-WAN is
+ disabled (`#496 <https://github.com/freifunk-gluon/gluon/issues/496>`_)
+
+ This may lead to issues in environments where a fixed MAC address is expected
+ (like VMware when promiscuous mode is disallowed).
+
+* Inconsistent respondd API
+ (`#522 <https://github.com/freifunk-gluon/gluon/issues/522>`_)
+
+ The current API is inconsistent and will be replaced eventually. The old API
+ will still be supported for a while.
+
+* Frequent reboots due to out-of-memory or high load due to memory pressure on
+ weak hardware specially in larger meshes
+ (`#1243 <https://github.com/freifunk-gluon/gluon/issues/1243>`_)
+
+ Optimizations in Gluon 2018.1 have significantly improved memory usage.
+ There are still known bugs leading to unreasonably high load that we hope to
+ solve in future releases.
--
GitLab